Polímeros: Ciência e Tecnologia
https://app.periodikos.com.br/journal/polimeros/article/doi/10.1590/S0104-14282005000100015
Polímeros: Ciência e Tecnologia
Scientific & Technical Article

Módulo de Reometria Capilar e Auto-Reforçamento de Baixo Custo

Low Cost Capillary Rheometer and Self-Reinforcement Module

De Paoli, Marco-Aurélio; Toma, Mário S.; Morita, Augusto T.

Downloads: 1
Views: 966

Resumo

São reportados os testes realizados com dois módulos capazes de realizar análises de reometria capilar e também induzir a orientação molecular (também chamado como auto-reforçamento) de polímeros, os quais foram projetados e montados neste laboratório. Os módulos são acoplados a uma Máquina Universal de Ensaios, a qual é responsável pela realização dos ensaios, sendo o baixo custo o principal atrativo dos módulos. Os resultados obtidos com o módulo de reometria capilar foram comparados com os obtidos num reômetro comercial e apresentaram boa concordância. O autoreforçamento foi capaz de induzir a orientação molecular e levar a um aumento de aproximadamente 50% nas propriedades de flexão, se comparadas às amostras não reforçadas.

Palavras-chave

Auto-reforçamento, reometria capilar, reologia

Abstract

The results obtained with a capillary rheometer and die-drawing module, designed and assembled in our laboratory, are presented. The modules were connected to a universal stress-strain equipment, which is responsible for the movements and the data acquisition. The results obtained with the capillary module, assembled in this work, were comparable to those obtained with a commercial equipment. The low cost is one of the main advantages of the reported equipment. The die-drawing method was also capable of inducing a molecular orientation and enhancing the flexural properties of a polymer material in comparison to the non-reinforced sample.

Keywords

Die-drawing, self-reinforcement, capillary rheometer, rheology

References



1. Ashammakhi, N.; Peltoniemi, H.; Waris, E.; Suuronen, R.; Serlo, W.; Kellomaki, M.; Tormala, P. & Waris, T. - Plastic & Reconstructive Surgery, 108, p.167 (2001).

2. Ward, I. M. - Macromolecular Symposia, 195, p.293 (2003)

3. Peijs, T., Materials Today, 6, p.30 (2003)

4. Ulas, I. & Craggs, G. - Proceedings of the Institution of Mechanical Engineers Part E - Journal of Process Mechanical Engineering, 209, p.59 (1995)

5. Bretas, R. E. S. & D’Avila, M. A. - Reologia de Polímeros Fundidos, Editora da UFSCar, São Carlos (2000).

6. Saikku-Backstrom, A.; Tulamo, R. M.; Pohjonen, T.; Tormala P., Raiha J. E. & Rokkanen, P. - Journal of Materials Science - Materials in Medicine, 10, p.1 (1999)
588371037f8c9d0a0c8b46a9 polimeros Articles
Links & Downloads

Polímeros: Ciência e Tecnologia

Share this page
Page Sections