Preparation and Structural Characterization of Hydroxylethyl Methacrylate Grafted Natural Rubber Latex
Wei, Feiyun; Yu, Hepin; Zeng, Zongqiang; Liu, Hongchao; Wang, Qifang; Wang, Jianlong; Li, Sidong
http://dx.doi.org/10.4322/polimeros.2014.068
Polímeros: Ciência e Tecnologia, vol.24, n3, p.283-290, 2014
Abstract
The graft copolymer with semi-interpenetrating polymer networks (semi-IPNs) from 2-hydroxyethyl methacrylate (HEMA) and natural rubber (NR) latex was prepared using cumene hydroperoxide and tetraethylene pentamine redox initiator system. The changes of grafting ratios and grafting efficiency with the reaction time and temperature, the concentration of crosslinking agent, initiator and monomer were investigated. The appropriate amounts of crosslinking agent (0.1phr), initiator (0.2phr) and monomer (20phr) and the optimum reaction conditions of 16°C×8h were determined. The swelling temperature and times of monomers against NR latex particles were found to be significant for the grafting copolymerization and the appropriate swelling conditions were 16°C×20h. The water contact angle measurement and platelet adhesion evaluation indicated that the hydrophilicity and blood compatibility of NR latex could be improved by grafting copolymerization with HEMA.
Keywords
Natural rubber latex, graft copolymerization, 2-hydroxyethyl methacrylate, redox initiator system, hydrophilicity and blood compatibility
References
1. Coran, A. Y. - “Science and technology of rubber”, Academic Press, London, chapt.7, p.291(1979).
2. March, J. - “Advanced organic chemistry”, 2nd edn, McGraw-Hill International, London, chapt.15 (1977).
3. Streitwiesser, A. & Heathcock, C. H. - “Introduction to Organic Vhemistry”, 2nd ed., Macmillan, New York, p.302 (1981).
4. Gelling, I. R. & Porter, M. - “Natural rubber science and technology”, Oxford University press, Oxford, p.359 (1988).
5. Burfield, D. R.; Chew, L. C. & Gan, S. N. - Polymer, 17, p.713 (1976). http://dx.doi.org/10.1016/0032-3861(76)90214-7
6. Loadman Junior, R. M.; Saville, B.; Steer, M. & Tidd, B. K. - Chem. Commun, p.1167 (1972).
7. Hourston, D. J. & Romaine, J. - Eur. Polym. J., 25, p.695 (1989). http://dx.doi.org/10.1016/0014-3057(89)90031-1
8. Hourston, D. J. & Romaine, J. - J. Appl. Polym. Sci., 39, p.1587 (1990). http://dx.doi.org/10.1002/ app.1990.070390715
9. Arayapranee, W.; Prasassarakich, P. & Rempel, G. L. - J. Appl. Polym. Sci., 89, p.63 (2003). http://dx.doi. org/10.1002/app.11999
10. George, B.; Maiti, S. N. & Varma, I. K. - J. Elastomers Plast., 38, p.319 (2006). http://dx.doi. org/10.1177/0095244306067129
11. Kochthongrasamee, T.; Prasassarakich, P. & Kiatkamjornwong, S. - J. Appl. Polym. Sci., 101, p.2587 (2006). http://dx.doi.org/10.1002/app.23997
12. Hourston, D. J. & Romaine, J. - J. Appl. Polym. Sci., 43, p.2207 (1991). http://dx.doi.org/10.1002/app.1991.070431208
13. Charmondusit, K.; Kiatkamjornwong, S. & Prasassarakich, P. - J. Sci. Chula. Univ., 23, p.167 (1998).
14. Kawahara, S.; Kawazura, T.; Sawada, T. & Isono, Y. - Polymer, 44, p.4527 (2003). http://dx.doi.org/10.1016/ S0032-3861(03)00415-4
15. Chuayjuljit, S.; Siridamrong, P. & Pimpan, V. - J. Appl. Polym. Sci., 94, p.1496 (2004). http://dx.doi.org/10.1002/ app.21064
16. Hu, R.; Dimonie, V. L. & El-Aasser, M. S. - J. Appl. Polym. Sci., 64, p.1123 (1997). http://dx.doi.org/10.1002/ (SICI)1097-4628(19970509)64:6<1123::AIDAPP12> 3.0.CO;2-X
17. Okieimen, F. E. & Urhoghidei, I. N. - J. Appl. Polym. Sci., 84, p.1872 (2002). http://dx.doi.org/10.1002/app.10474
18. Fuminori, I.; Kimiko, M.; Hiroyuki, O.; Hiroshi, T. & Shinzo, O. - Colloids Surf. A: Physicochem. Eng. Aspects, 2, p.71 (2004).
19. Kangwansupamonkon, W.; Gilbert, R. G. & Kiatkamjornwong, S. - Macromo. Chem. Phys., 206, p.2450 (2005). http://dx.doi.org/10.1002/macp.200500255
20. Oliveira, P. C.; Guimarães, A.; Cavaillé, J-Y.; Chazeau, L. & Gilbert, R. G. - Polymer, 46, p.1105 (2005). http:// dx.doi.org/10.1016/j.polymer.2004.11.048
21. Promdum, Y.; Klinpituksa, P. & Ruamcharoen, A. - Songklanakarin J. Sci. Technol., 31, p.453 (2009).
22. Li, J.; Geng, H. B. & Chen, Q. M. - Acta Polym. Sinica, 6, p.838 (2006). http://dx.doi.org/10.3724/SP.J.1105.2006.00838
23. Wang, P.; Tan, K. L.; Ho, C. C.; Khew, M. C. & Kang, E. T. - Eur. Polym. J., 36, p.1323 (2000). http://dx.doi. org/10.1016/S0014-3057(99)00193-7
24. Cheo, S. H. Y.; Wang, P.; Tan, K. L.; Ho, C. C. & Kang, E. T. - J. Mater. Sci.- Mater. Med., 12, p.377 (2001). http:// dx.doi.org/10.1023/A:1011280416520
25. Kochthongrasamee, T.; Prasassarakich, P. & Kiatkamjornwong, S. - J. Appl. Polym. Sci., 101, p.2587 (2006). http://dx.doi. org/10.1002/app.23997
26. Anancharungsuk, W.; Tanpantree, S. & Sruangamurak, A. - J. Appl. Polym. Sci., 104, p.2270 (2007). http://dx.doi. org/10.1002/app.25661
27. Hoven, V. P., Chombanpaew, K.; Iwasaki, Y. & Tasakorn, P. - J. Appl. Polym. Sci., 112, p.208 (2009). http://dx.doi. org/10.1002/app.29408
28. Kwok, D. Y. & Neumann, A. W. - Adv. Colloid Interface Sci., 81, p.167 (1999). http://dx.doi.org/10.1016/S0001- 8686(98)00087-6