Estudo da Influência de Argilas Organofílicas no Processo de Biodegradação do PLA
Study of the Influence from Organoclays on the Biodegradation Process of PLA
Souza, Patricia Moraes S.; Morales, Ana R.; Mei, Lucia H. I.
http://dx.doi.org/10.4322/polimeros.2014.058
Polímeros: Ciência e Tecnologia, vol.24, n1, p.110-116, 2014
Resumo
Neste estudo, foram preparados, pelo método de intercalação do fundido, nanocompósitos de PLA com as argilas organofílicas Cloisite 20A e Cloisite 30B. A influência das argilas no processo de biodegradação do PLA foi avaliada com base no método de respirometria. A incorporação da argila Cloisite 20A praticamente não alterou a curva de mineralização do PLA. O nanocompósito com Cloisite 30B, por sua vez, apresentou um comportamento distinto, indicando um atraso no processo de biodegradação do polímero neste material. As amostras foram caracterizadas pelas técnicas de Difração de Raios X, Análise Termogravimétrica e Calorimetria Diferencial Exploratória. A caracterização dos materiais indicou uma estrutura possivelmente intercalada dos nanocompósitos, bem como a redução da estabilidade térmica e um pequeno aumento no grau de cristalinidade, em relação ao polímero puro.
Palavras-chave
Poli(ácido lático), nanocompósitos, biodegradação
Abstract
In this study nanocomposites of PLA and organoclays Cloisite 20A and Cloisite 30B were prepared by melt intercalation. The influence from the organoclays on the biodegradation of PLA was evaluated based on the respirometry method. The incorporation of clay Cloisite 20A did not change the mineralization curve of PLA. The nanocomposite with Cloisite 30B, on the other hand, presented a different behavior, indicating a delay in the polymer biodegradation. The materials were characterized by X-ray Diffraction, Thermogravimetric Analysis and Differential Scanning Calorimetry. The materials characterization indicated nanocomposites with an intercalated structure as well as reduced thermal stability and a slight increase in the degree of crystallinity compared to the pure polymer.
Keywords
Poly(lactic acid), nanocomposites, biodegradation
References
1. Borschiver, S.; Almeida, L. F. M. & Roitman, T. Polímeros, 18, p.256 (2008). http://dx.doi.org/10.1590/ S0104-14282008000300012
2. Rasal, R. M.; Janorkar, A. V. & Hirt, D. E. - Prog. Polym. Sci., 35, p.338 (2010). http://dx.doi.org/10.1016/j. progpolymsci.2009.12.003
3. Jamshidian, M.; Tehrany, E. A.; Imran, M.; Jacquot, M. & Desobry, S. - Compr. Rev. Food Sci. Food Saf., 9, 552 (2010). http://dx.doi.org/10.1111/j.1541-4337.2010.00126.x
4. Maiti, P.; Yamada, K.; Okamoto, M.; Ueda, K. & Okamoto, K. - Chem. Mater., 14, p.4654 (2002). http://dx.doi. org/10.1021/cm020391b
5. Chang, J.; An, Y. U. & Sur, G. S. - J. Polym. Sci., Part B: Polym. Phys., 41, p.94 (2003). http://dx.doi.org/10.1002/ polb.10349
6. Ray, S. S. & Okamoto, M. - Macromol. Rapid Commun., 24, p.815 (2003). http://dx.doi.org/10.1002/marc.200300008
7. Thellen, C.; Orroth, C.; Froio, D.; Ziegler, D.; Lucciarini, J.; Farrel, R.; Souza, N. A. & Ratto, J. A. - Polymer., 46, p.11716 (2005). http://dx.doi.org/10.1016/j.polymer.2005.09.057
8. Koh, H.C.; Park, J.S.; Jeong, M.A.; Hwang, H.Y.; Hong, Y.T.; Ha, S.Y. & Nam, S.Y. - Desalination., 233, p.201 (2008). http://dx.doi.org/10.1016/j.desal.2007.09.043
9. Chowdhury, S. R. - Polym Int., 57, p.1326 (2008). http:// dx.doi.org/10.1002/pi.2464
10. Rhim, J.; Hong, S. & Ha, C. - LWT-- Food Sci. Technol., 42, p.612 (2009).
11. Katiyar, V.; Gerds, N.; Koch, C.B.; Risbo, J.; Hansen, H.C.B. & Plackett, D. - J. Appl. Polym. Sci., 122, p.112 (2011). http://dx.doi.org/10.1002/app.33984
12. Morales, A.R.; Cruz, C. V.M. & Peres, L. - Polímeros, 20, p. 39 (2010). http://dx.doi.org/10.1590/S0104- 14282010005000004
13. Yang, K.; Wang, X. & Wang, Y. - J. Ind. Eng. Chem., 13, p.485 (2007).
14. Solarski, S. ; Mahjoubiu, F. ; Ferreira, M. ; Devaux, E. ; Bachelet, P.; Bourbigot, S. ; Delobel, R. ; Coszach, P. ; Murariu, M. ; Ferreira, A. S. ; Alexandre, M. ; Degee, P. & Dubois, P. - J. Mater. Sci., 42, p.5105 (2007). http://dx.doi. org/10.1007/s10853-006-0911-0
15. Rudnik, E. & Briassoulis, D. - Ind. Crops Prod, 33, p.648 (2011). http://dx.doi.org/10.1016/j.indcrop.2010.12.031
16. Tokiwa, Y. & Calabia, B. P. - Appl. Microbiol. Biotechnol., 72, p.244(2006). http://dx.doi.org/10.1007/ s00253-006-0488-1
17. American Society for Testing and Materials - ASTM – “ASTM D6400-12: Standard specification for labeling of plastics designed to be aerobically composted in municipal or industrial facilities”, ASTM. (2012).
18. Ray, S. S.; Yamada, K.; Okamoto, M. & Ueda, K. - Polymer, 44, p.857 (2003).
19. Fukushima, K.; Abbate, C.; Tabuani, D.; Gennari, M. & Camino, G. - Polym. Degrad. Stab., 94, p.1646 (2009). http://dx.doi.org/10.1016/j.polymdegradstab.2009.07.001
20. Lee, S.; Park, H.; Lim, H.; Kang, T.; Li, X.; Cho, W. & Ha, C. – Polymer, 43, p.2495 (2002). http://dx.doi.org/10.1016/ S0032-3861(02)00012-5
21. Kijchavengkul, T.; Auras, R.; Rubino, M.; Ngouanjio, M. & Fernandez, R. T. - Polym. Test., 25, p.1006 (2006). http:// dx.doi.org/10.1016/j.polymertesting.2006.06.008
22. Ray, S. S.; Ogami, A.; Okamoto, M. & Ueda, K. - Macromol. Rapid Commun., 23, p.943 (2002). http:// dx.doi.org/10.1002/1521-3927(200211)23:16<943::AIDMARC943> 3.0.CO;2-F
23. Sangwan, P.; Way, C. & Wu, D. - Macromol. Biosci., 9, p.677 (2009). http://dx.doi.org/10.1002/mabi.200800276
24. Mei, L.H.I. & Mariani, P. D. S. C. - “Visão geral sobre polímeros ou plásticos ambientalmente degradáveis (PADs)”, Editora Flamboyant, Campinas (2005).
25. Suksut, B. & Deeprasertkul, C. - J. Polym. Environ, 19, p.288 (2011). http://dx.doi.org/10.1007/s10924-010-0278‑9
26. Fischer, E.W., Sterzel, H. J. & Wegner, G. - Colloid Polym. Sci., 251, p.980 (1973).
27. International Organization for Standardization – “ISO 14855-2: Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions -- Method by analysis of evolved carbon dioxide -- Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test” (2007).
28. Kale, G.; Auras, R.; Singh, S. P. & Narayan, R. - Polym. Test., 26, p.1049 (2007). http://dx.doi.org/10.1016/j. polymertesting.2007.07.006
29. Kiehl, J. E. - “Fertilizantes orgânicos”, Agronômica Ceres, Piracicaba (1985).
30. Paiva, L. B.; Morales, A. R., Branciforti, M. C. & Bretas, R. S. - Braz. J. Chem. Eng., 29, p.751 (2012). http://dx.doi. org/10.1590/S0104-66322012000400007
31. Pluta, M.; Paul, M.; Alexandre, M. & Dubois, P. - J. Polym. Sci., Part B: Polym. Phys., 44, p.299 (2006). http://dx.doi. org/10.1002/polb.20694
32. Li, T.; Turng, L.; Gong, S. & Erlacher, K. - Polym. Eng. Sci., 46, p. 1419 (2006). http://dx.doi.org/10.1002/ pen.20629
33. Kramschuster, A.; Gong, S. Turng, L.; Li, T. & Li, T. - J. Biobased Mater. Bioenergy., 1, p.37 (2007). http://dx.doi. org/10.1166/jbmb.2007.004
34. Bertini, F.; Canetti, M.; Audisio, G.; Costa, G. & Falqui, L.- Polym. Degrad. Stab., 91, p.600 (2006). http://dx.doi. org/10.1016/j.polymdegradstab.2005.02.027
35. Leszczynska, A.; Njuguna, J.; Pielichowski, K. & Banerjee, J. R. - Thermochim. Acta, 453, p.75 (2007).
36. Bourbigot, S.; Fontaine, G. - Polym. Chem, 1, p.1413 (2010). http://dx.doi.org/10.1039/c0py00106f
37. Hsieh, A. J.; Moy, P.; Beyer, F. L.; Madison, P.; Napadensky, E. Ren, J. & Krishnamoorti, R. - Polym. Eng. Sci., 44, p.825 (2004). http://dx.doi.org/10.1002/pen.20074
38. Pan, P.; Zhu, B. & Inoue, Y. - Macromolecules, 40, p.9664 (2007). http://dx.doi.org/10.1021/ma071737c
39. Ozkoc, G.; Kemaloglu, S. - J. Appl. Polym. Sci., 114, p.2481 (2009). http://dx.doi.org/10.1002/app.30772
40. Hong, S-I. & Rhim, J-W. - J. Nanosci. Nanotechnol., 8, p.5818 (2008).
41. Rhim, J. W.; Hong, S-I.; Park, H. M. & Ng, P. K. W. - J. Agric. Food. Chem., 54, p.5814 (2006). http://dx.doi. org/10.1021/jf060658h
42. Merianos, J. J. - “Quatternary ammonium antimicrobial compounds”, in: Disinfection, sterilization, and preservation, cap. X, Seymour S. Block (ed.), Lea & Febiger, Philadelphia (1991).
43. Massi, L.; Guitard, F.; Géribaldi, S.; Levy, R.; Duccini, Y. - Int. J. Antimicrob. Agents, 21, p.20 (2003). http:// dx.doi.org/10.1016/S0924-8579(02)00271-6
44. Van Ginkel, C. G. - “Biodegradation of cationic surfactants: an environmental perspective”, cap. 19, Uri Zoller (ed.), Marcel Dekker, New York (2004).
45. Nigmatullin, R.; Gao, F.; Konovalova, V.- J. Mater. Sci, 43, p. 5728 (2008). http://dx.doi.org/10.1007/s10853-008- 2879-4