Metal Nanoparticles/Ionic Liquid/Cellulose: Polymeric Membrane for Hydrogenation Reactions
Gelesky, Marcos Alexandre; Scheeren, Carla Weber
http://dx.doi.org/10.4322/polimeros.2014.048
Polímeros: Ciência e Tecnologia, vol.24, nEspecial, p.1-7, 2014
Abstract
Rhodium and platinum nanoparticles were supported in polymeric membranes with 10, 20 and 40 μm thickness. The polymeric membranes were prepared combining cellulose acetate and the ionic liquid (IL) 1-n-butyl-3-methylimidazolium bis(trifluoromethane sulfonyl)imide (BMI.(NTf)2. The presence of metal nanoparticles induced an increase in the polymeric membrane surface areas. The increase of the IL content resulted in an improvement of elasticity and decrease in tenacity and toughness, whereas the stress at break was not affected. The presence of IL probably causes an increase in the separation between the cellulose molecules that result in a higher flexibility and processability of the polymeric membrane. The CA/IL/M(0) combinations exhibit an excellent synergistic effect that enhances the activity and durability of the catalyst for the hydrogenation of cyclohexene. The CA/IL/M(0) polymeric membrane displays higher catalytic activity (up to 7.353 h-1) for the 20 μm of CA/IL/Pt(0) and stability than the nanoparticles dispersed only in the IL.
Keywords
hydrogenation reactions, ionic liquid, nanoparticles, polymeric membrane
References
1. Scheeren, C. W.; Hermes, V.; Bianchi, O.; Hertz, P. F.; Dias, S. L. & Dupont, J. - J Nanosci Nanotechnol., 11, p.1 (2011).
2. Ding, B.; Kimura, E.; Sato, T.; Fujita, S. & Shiratori, S. - Polymer., 45, p.1895 (2004). http://dx.doi.org/10.1016/j. polymer.2004.01.026
3. Nagendran, A. & Mohan, D. R. - Polym. Adv. Technol., 19, p.24 (2008). http://dx.doi.org/10.1002/pat.965
4. Edgar, K. J.; Buchanan, E. K. C. M.; Debenham, J. S.; Rundquist, P. A.; Seiler, B. D.; Shelton, M. C. & Tindall, D. - Prog. Polym. Sci., 26, p.1605 (2001). http://dx.doi. org/10.1016/S0079-6700(01)00027-2
5. Rezende, C. A.; Luchesi, C.; Barbo, M. L. P. & Duek, E. A. R. - Polímeros, 15, p.232 (2005). http://dx.doi.org/10.1590/ S0104-14282005000300015
6. Maria, L. C. S.; Santos, A. L. C.; Oliveira, P. C.; Valle, S. S.; Barud, H. S.; Messaddeq, Y. & Ribeiro, S. J. L. - Polímeros, 20, p.72 (2010). http://dx.doi.org/10.1590/ S0104-14282010005000001
7. Quadros, C. C.; Faria, V. W.; Klein, M. P.; Hertz, P. F. & Scheeren, C. W. - J Nanotechnol., 2013, p.1 (2013). http:// dx.doi.org/10.1155/2013/140273
8. Stoimenov, P. K.; Klinger, R. L.; Marchin, G. L. & Klabunde, K. J. - Langmuir., 18, p.6679 (2002). http:// dx.doi.org/10.1021/la0202374
9. Scheeren, C. W.; Hertz, P. F.; Hermes, V. & Dupont, J. - Process Biochem., 22, p.1123 (2011).
10. Santa-Maria, L. C.; Oliveira, R. O.; Merçon, F.; Borges, M. E. R. S. P.; Barud, H. S.; Ribeiro, S. J. L.; Messaddeq, Y. & Wang, S. H. - Polímeros, 20, p.227 (2010).
11. Müller, F.; Ferreira, C. A.; Amado, F. D. R. & Rodrigues, M. A. S. - Polímeros, 21, p.259 (2011). http://dx.doi. org/10.1590/S0104-14282011005000053
12. Bellincanta, T.; Poletto, P.; Thürmer, M. B.; Duarte, J.; Toscan, A. & Zeni, M. - Polímeros, 21, p.229 (2011). http:// dx.doi.org/10.1590/S0104-14282011005000045
13. Thürmer, M. B.; Poletto, P.; Marcolin, M.; Ferreira, D. G. & Zeni, M. - Polímeros, 20, p.170 (2010). http://dx.doi. org/10.1590/S0104-14282010005000037
14. Barud, H. S.; Ribeiro, S. J. L.; Carone, C. L. P.; Ligabue, R.; Einloft, S. & Jahno V. D. - Polímeros, 23, p.135 (2013).
15. Steinrück, H. P.; Libuda, J.; Wasserscheid, P.; Cremer, T.; Kolbeck, C.; Laurin, M.; Maier, F.; Sobota, M.; Schulz, P. S. & Stark, M. - Adv. Mater., 23, p.2571 (2011). PMid:21520462. http://dx.doi.org/10.1002/ adma.201100211
16. Werner, S.; Haumann, M. & Wasserscheid, P. - Annual Rev. Chem. Biomolecular Eng., 1, p.203 (2010). PMid:22432579. http://dx.doi.org/10.1146/annurevchembioeng- 073009-100915
17. Donato, R. K.; Migliorini, M. V.; Benvegnú, M. A.; Stracke, M. P.; Gelesky, M. A.; Pavan, F. A.; Schrekker, C. M. L.; Benvenutti, E. V.; Dupont, J. & Schrekker, H. S. - J Solgel Sci Technol., 49, p.71 (2009). http://dx.doi.org/10.1007/ s10971-008-1829-6
18. Bianchini, C. & Giambastiani, G. - Chemtracts, 16, p.301 (2003).
19. Kohler, F.; Roth, D.; Kuhlmann, E.; Wasserscheid, P. & Haumann, M. - Green Chem., 12, p.979 (2010). http:// dx.doi.org/10.1039/c004883f
20. Feng, C. L.; Wang, Y. H. & Jin, Z. L. - Prog. Chem., 17, p.209 (2005).
21. Haumann, M.; Dentler, K.; Joni, J.; Riisager, A. & Wasserscheid, P. - Adv. Synth. Catal., 349, p.425 (2007). http://dx.doi.org/10.1002/adsc.200600413
22. Webb, P. B.; Kunene, T. E. & Cole-Hamilton, D. J. - Green Chem., 7, p.373 (2005). http://dx.doi.org/10.1039/ b416713a
23. Gelesky, M. A.; Chiaro, S. S. X.; Pavan, F. A.; dos Santos, J. H. Z. & Dupont, J. - Dalton Trans., 47, p.5549 (2007). PMid:18043816. http://dx.doi.org/10.1039/b708111a
24. Zornoza, B.; Irusta, S.; Tellez, C. & Coronas, J. - Langmuir., 25, p.5903 (2009). PMid:19391574. http:// dx.doi.org/10.1021/la900656z
25. Bottino, A.; Capannelli, G.; Comite, A.; Del Borghi, A. & Di Felice, R. - Sep. Purif. Technol., 34, p.239 (2004). http:// dx.doi.org/10.1016/S1383-5866(03)00196-5
26. Centi, G. & Perathoner, S. - Catal. Today., 79, p.3 (2003). http://dx.doi.org/10.1016/S0920-5861(03)00036-1
27. Khatib, S. J. & Oyama, S. T. - Sep. Purif. Technol., 11, p.20 (2013). http://dx.doi.org/10.1016/j.seppur.2013.03.032
28. Fritsch, D. & Bengtson, G. - Catal. Today., 118, p.121 (2006). http://dx.doi.org/10.1016/j.cattod.2006.01.039
29. Ozdemir, S. S.; Buonomenna, M. G. & Drioli, E. - Appl Catal A Gen., 307, p.167 (2006). http://dx.doi.org/10.1016/j. apcata.2006.03.058
30. Kragl, U. & Dwars, T. - Trends Biotechnol., 19, p. 442 (2001). http://dx.doi.org/10.1016/S0167-7799(01)01766-8
31. Belyakova, L. A.; Linkov, V. M.; Belyakov, V. N. & Bulavina, T. V. - Sep. Purif. Technol., 14, p.117 (1998). http://dx.doi.org/10.1016/S1383-5866(98)00066-5
32. Tonkovich, A. L. Y.; Zilka, J. L.; Jimenez, D. M.; Roberts, G. L. & Cox, J. L. - Chem. Eng. Sci., 51, p.789 (1996). http://dx.doi.org/10.1016/0009-2509(95)00325-8
33. Cuffe, L.; MacElroy, J. M. D.; Tacke, M.; Kozachok, M. & Mooney, D. A. J. - Membr. Sci., 272, p.6 (2006). http:// dx.doi.org/10.1016/j.memsci.2005.12.021
34. Xu, J.; Dozier, A. & Bhattacharyya, D. J. - Nanop. Res., 7, p.449 (2005). http://dx.doi.org/10.1007/s11051- 005‑4273‑3
35. Cai, J.; Kimura, S.; Wada, M. & Kuga, S. - Biomacromolecules, 10, p.87 (2009). PMid:19053296. http://dx.doi.org/10.1021/bm800919e
36. Bagheri, M.; Rodriguez, H.; Swatloski, R. P.; Spear, S. K.; Daly, D. T. & Rogers, R. D. - Biomacromolecules, 9, p.381 (2008). PMid:18163541. http://dx.doi.org/10.1021/ bm701023w
37. El Seoud, O. A.; Koschella, A.; Fidale, L. C.; Dorn, S. & Heinze, T. Biomacromolecules, 8, p.2629 (2007). PMid:17691840. http://dx.doi.org/10.1021/bm070062i
38. Viswanathan, G.; Murugesan, S.; Pushparaj, V.; Nalamasu, O.; Ajayan, P. M. & Linhardt, R. J. - Biomacromolecules, 7, p.415 (2006). PMid:16471910. http://dx.doi.org/10.1021/ bm050837s
39. Chiba, R.; Nishio, Y.; Sato, Y.; Ohtaki, M. & Miyashita, Y. - Biomacromolecules, 7, p.3076 (2006). PMid:17096534. http://dx.doi.org/10.1021/bm060567t
40. Turner, M. B.; Spear, S. K.; Holbrey, J. D.; Daly D. T. & Rogers, R. D. Biomacromolecules, 6, p.2497 (2005). PMid:16153085. http://dx.doi.org/10.1021/bm050199d
41. Migowski, P. & Dupont, J. - Chem. Eur. J., 13, p.32 (2007). PMid:17115465. http://dx.doi.org/10.1002/chem.200601438
42. Gelesky, M. A.; Umpierre, A. P.; Machado, G.; Correia, R. R. B.; Magno, W. C.; Morais, J.; Ebeling, G. & Dupont, J. J. - Am. Chem. Soc., 127, p.4588 (2005). PMid:15796520. http://dx.doi.org/10.1021/ja042711t
43. Scheeren, C. W.; Machado, G.; Teixeira, S. R.; Morais, J.; Domingos, J. B. & Dupont, J. J. - Phys. Chem. B, 110, p.13011 (2006). PMid:16805608. http://dx.doi. org/10.1021/jp0623037
44. Cassol, C. C.; Ebeling, G.; Ferrera, B. & Dupont, J. - Adv. Synth. Catal., 348, p.243 (2006). http://dx.doi.org/10.1002/ adsc.200505295
45. Campos, E. A. & Gushikem, Y. J. - J Colloid Sci., 193, p.121 (1997). http://dx.doi.org/10.1006/jcis.1997.5051
46. Kwon, J. W.; Yoon, S. H.; Lee, S. S.; Seo, K. W. & Shim, I. W. - Bull. Korean Chem. Soc., 26, p.837 (2005).
47. Rodrigues, U. P.; Gushikem, Y.; Gonçalves, M. D.; Cachichi, R. C. & de Castro, S. C. - Chem. Mater., 8, p.1375 (1996).
48. Feldman, J. & Orchin, M. J. - Mol. Catal., 63, p.213 (1990). http://dx.doi.org/10.1016/0304-5102(90)85145-8
49. Barrett, E. P.; Joyner, L. G. & Halenda, P. P. - J. Am. Chem. Soc., 73, p.373 (1951). http://dx.doi.org/10.1021/ ja01145a126
50. Brunauer, S. - Langmuir, 3, p.3 (1987).
51. Zhu, S. D.; Wu, Y. X.; Chen, Q. M.; Yu, Z. N.; Wang, C. W.; Jin, S. W.; Ding, Y. G. & Wu, G. - Green Chem., 8, p.325 (2006). http://dx.doi.org/10.1039/b601395c