Polímeros: Ciência e Tecnologia
https://app.periodikos.com.br/journal/polimeros/article/doi/10.4322/polimeros.2013.082
Polímeros: Ciência e Tecnologia
Scientific & Technical Article

Preparation, Characterization and Properties of Films Obtained from Cross-linked Guar Gum

Banegas, Rodrigo S.; Zornio, Clarice F.; Borges, Adriana de M. G.; Porto, Ledilege C.; Soldi, Valdir

Downloads: 0
Views: 268

Abstract

In this study the viability of using guar gum to form films was investigated along with the effectiveness of the cross-linking process employing 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC) as the cross-linking agent. In addition, the cross-linked films were evaluated considering the water absorption, thermal stability and mechanical properties. The cross-linking process of guar gum films was confirmed by the low solubility in water and through infrared analysis. The results shown that the properties evaluated were affected by the cross-linking process due to changes in the polysaccharide structure. For example, the swelling behavior and water vapor absorption decreased with an increase in the amount of EDC. The EDC content (10-30%) also affected the polymer structure and hydrogen bond formation, reducing the thermal stability of the system.

Keywords

Guar gum films, cross-linking process, water absorption, EDC

References

1. Arltoft, D.; Madsen, F. & Ipsen. R. - Food Hydrocolloid., 21, p.1062 (2007). http://dx.doi.org/10.1016/j.foodhyd.2006.07.020

2. Akhtar, M. & Dickinson, E. - Food Hydrocolloid., 21, p.607 (2007). http://dx.doi.org/10.1016/j.foodhyd.2005.07.014

3. Nishinari, K. & Takahashi, R. - Curr. Opin.Colloid In., 8, p.396 (2003). http://dx.doi.org/10.1016/S1359-0294(03)00099-2

4. Barbosa, M. A.; Granja, P. L.; Barrias, C. C. & Amaral, I. F. - ITBMRBM, 26, p.212 (2005). http://dx.doi.org/10.1016/j.rbmret.2005.04.006

5. Nishikawa, T.; Nishida, J.; Ookura, R.; Nishimura, S-I.; Wada, S.; Karino, T. & Shimomura, M. - Mater. Sci. Eng. C, 8-9, p.495 (1999). http://dx.doi.org/10.1016/S0928-4931(99)00075-2

6. Dawson, E.; Mapili, G.; Erickson, K.; Taqvi, S. & Roy, K. - Adv. Drug Deliver. Rev., 60, p.215 (2008). PMid:17997187. http://dx.doi. org/10.1016/j.addr.2007.08.037

7. Peppas, N. A.; Bures, P.; Leobandung, W. & Ichikawa, H. - Eur. J. Pharm. Biopharm., 50, p.27 (2000). http://dx.doi.org/10.1016/S0939- 6411(00)00090-4

8. Brinker, A. - Aquaculture, 267, p.315 (2007). http://dx.doi. org/10.1016/j.aquaculture.2007.02.037

9. Cunha, P. L. R.; Castro, R. R.; Rocha, F. A. C.; De Paula, R. C. M. & Feitosa, J. P. A. - Int. J. Biol. Macromol., 37, p.99 (2005). PMid:16221491. http://dx.doi.org/10.1016/j.ijbiomac.2005.09.001

10. McCleary, B. V.; Clark, A. H.; Dea, I. C. M. & Rees, D. A. - Carbohyd. Res., 139, p.237 (1985). http://dx.doi.org/10.1016/0008-6215(85)90024-2

11. Sandolo, C.; Matricardi, P.; Alhaique, F. & Coviello T. - Food Hydrocolloid., 23, p.210 (2009). http://dx.doi.org/10.1016/j. foodhyd.2008.01.001

12. Johnson, F. M. - Environ. Mol. Mutagen., 39, p.69 (2002). PMid:11813298. http://dx.doi.org/10.1002/em.10037

13. Coviello, T.; Alhaique, F.; Dorigo, A.; Matricardi, P. & Grassi, M. - Eur. J. Pharm. Biopharm., 66, p.200 (2007). PMid:17156985. http://dx.doi. org/10.1016/j.ejpb.2006.10.024

14. Young, S.; Wong, M.; Tabata, Y. & Mikos, A. G. - J. Control. Release, 109, p.256. (2005). PMid:16266768. http://dx.doi.org/10.1016/j. jconrel.2005.09.023

15. Gliko-Kabir, I.; Penhasi, A. & Rubinstein, A. - Carbohyd. Res., 316, p.6. (1999). http://dx.doi.org/10.1016/S0008-6215(99)00025-7

16. Gliko-Kabir, I.; Yagen, B.; Penhasi, A. & Rubinstein, A. J. - Control. Release, 63, p.121 (2000). http://dx.doi.org/10.1016/S0168- 3659(99)00179-0

17. Gliko-Kabir, I; Yagen, B.; Penasi, A.; Rubinstein, A. - Pharmaceut. Res., 15, p.1019 (1998). PMid:9688054. http://dx.doi. org/10.1023/A:1011921925745

18. Burruano, B. T.; Schnaare, R. L. & Malamud, D. - Contraception, 66, p.137 (2002). http://dx.doi.org/10.1016/S0010-7824(02)00336-0

19. Chaurasia, M.; Chourasia, M. K; Jain, N. K.; Jain, A.; Soni, V.; Gupta, Y. & Jain, S. K. - AAPS PharmSciTech. , 7, p.74 (2006). PMid:17025254.

20. Lee, J. M.; Edwards, H. H. L.; Pereira, C. & Samii, S. I. - J. Mater. Sci- Mater. M., 7, p.531 (1996).

21. Choi, Y. S.; Hong, S. R.; Lee, Y. M.; Song, K. W.; Park, M. H. & Nam, Y. S. - J. Biomed. Mater. Res., 48, p.631 (1999). http://dx.doi.org/10.1002/ (SICI)1097-4636(1999)48:5<631::AID-JBM6>3.0.CO;2-Y

22. Cascone, M. G.; Sim, B. & Sandra, D. - Biomaterials, 16, p.569 (1995). http://dx.doi.org/10.1016/0142-9612(95)91131-H

23. Liang, H. C.; Chang, W. H.; Liang, H. F.; Lee, M. H. & Sung. H. W. - J. Appl. Polym. Sci., 91, p.4017 (2004). http://dx.doi.org/10.1002/ app.13563

24. Liu, X.; Smith, L. A.; Hu, J. & Ma, P. X. - Biomaterials, 30, p.2252 (2009). PMid:19152974 PMCid:2679864. http://dx.doi.org/10.1016/j. biomaterials.2008.12.068

25. Kolodziejska, I. & Piotrowska, B. - Food Chem., 103, p.295 (2007).

26. Cunha, P. L. R.; Paula, R. C. M. & Feitosa, J. P. A. - Int. J.Biol. Macromol., 41, p.324 (2007). PMid:17531313. http://dx.doi. org/10.1016/j.ijbiomac.2007.04.003

27. Angles, M. N. & Dufresne, A. - Macromolecules, 33, p.8344 (2000). http://dx.doi.org/10.1021/ma0008701

28. Marquie, C.; Ayrmard, C.; Cuq, J. L. & Guilbert, S. - J. Agr. Food Chem., 43, p.2762 (1995). http://dx.doi.org/10.1021/jf00058a040

29. Galietta, G.; Di-Gioia, L.; Guilbert, S. & Cuq, B. - J. Dairy Sci., 81, p.3123 (1998). http://dx.doi.org/10.3168/jds.S0022-0302(98)75877-1

30. Sannino, A.; Pappadà, S.; Madaghiele, M.; Maffezzoli, A.; Ambrosio, L. & Nicolais, L. - Polymer, 46, p.11206 (2005). http://dx.doi. org/10.1016/j.polymer.2005.10.048

31. Tejado, A.; Antal, M.; Liu, X. & Van de Ven, T. G. M. - Ind. Eng. Chem. Res., 50, p.5907 (2011). http://dx.doi.org/10.1021/ie1023589

32. Uhlin, F.; Fridolin, I.; Lindberg, L. G. & Magnusson, M. - Nephrol. Dial. Transpl., 20, p.2458 (2005). PMid:16077147. http://dx.doi. org/10.1093/ndt/gfi026

33. Mundargi, R. C.; Agnihotri, S. A.; Patil, S. A. & Aminabhavi, T. M. - J. Appl. Polym. Sci., 101, p.618 (2006). http://dx.doi.org/10.1002/ app.23325

34. Wang, W.; Zhang, J. & Wang, A. - Appl. Clay Sci., 46, p.21 (2009). http://dx.doi.org/10.1016/j.clay.2009.07.001

35. Copikova, J.; Synytsya, A.; Cerna, M.; Kaasova, J. & Novotna, M. - Czech J. Food Sci., 19, p.51 (2001).

36. Li, Z-F.; Li, J-Y.; Sun, J.; Sun, B-Q.; Wang, J-J. & Shen, Q. - Front. Mater. Sci. China, 2, p.200 (2008). http://dx.doi.org/10.1007/s11706- 008-0033-5

37. Jena, K. K.; Chattopadhyay, D. K. & Raju, K. V. S. N. - Eur. Polim. J., 43, p.1825 (2007). http://dx.doi.org/10.1016/j.eurpolymj.2007.02.042

38. Zhang, R. - Polymer, 46, 2443 (2005). http://dx.doi.org/10.1016/j. polymer.2005.02.006

39. Martucci, J. F.; Ruseckaite, R. A. & Vazquez, A. - Mater. Sci. Eng. A, 435-436, p.681 (2006). http://dx.doi.org/10.1016/j.msea.2006.07.097

40. Huang, Y.; Yu, H. & Xiao, C. - Carbohyd. Polym., 66, p.500 (2006). http://dx.doi.org/10.1016/j.carbpol.2006.04.001

41. Akcelrud, L. - “Fundamentos da ciência dos polímeros”, 1st ed., Manole, Barueri, p.288 (2007).

42. Soppirnath, K. S. & Aminabhavi, T. M. - Eur. J. Pharm. Biopharm., 53, p.87 (2002). http://dx.doi.org/10.1016/S0939-6411(01)00205-3

43. Debeaufort, F. & Voilley, A. - J. Agric. Food Chem., 45, p.685 (1997). http://dx.doi.org/10.1021/jf9606621

44. Sothornvit, R. & Krochta, J.M. - J. Food Eng., 50, p.149 (2001). http:// dx.doi.org/10.1016/S0260-8774(00)00237-5

45. Cristiano, C. M. Z.; Fayad, S. J.; Porto, L. C. & Soldi, V. - J. Bras. Chem. Soc., 21, p.340 (2010). http://dx.doi.org/10.1590/S0103- 50532010000200021

46. Shenoy, M. & D’Melo, D. J. - E-polymers, 1, p.111 (2007).
588371907f8c9d0a0c8b4969 polimeros Articles
Links & Downloads

Polímeros: Ciência e Tecnologia

Share this page
Page Sections