Polímeros: Ciência e Tecnologia
https://app.periodikos.com.br/journal/polimeros/article/doi/10.1590/S0104-14282005000300005
Polímeros: Ciência e Tecnologia
Scientific & Technical Article

Filmes Tubulares de Compósitos de Termoplásticos Pós-consumo: Análise Térmica e Mecânica

Blown Films of Post-Consumer Thermoplastic Composites: Thermal and Mechanical Analyses

Manrich, Sati; Santana, Ruth M. C.

Downloads: 0
Views: 967

Resumo

Compósitos ternários de resíduos pós-consumo de polipropileno (PP), poliestireno de alto impacto (HIPS) e carbonato de cálcio (CaCO3) foram preparados para obter filmes de papel sintético e avaliar suas propriedades térmicas e mecânicas. Estes filmes compósitos altamente carregados com 10, 20 e 30 % em peso de CaCO3 foram extrudados na extrusora sopro de filme (matriz tubular), em duas condições de velocidade da rosca: 32 e 51 rpm. A orientação dos filmes compósitos foi determinada por meio dos parâmetros das razões de processo: R1 (ao longo da direção da máquina), Rt (na direção transversal da máquina) e Rc (razão entre RL/Rt). Ensaios de caracterização por Calorimetria diferencial de varredura (DSC) e resistência à tração e ao rasgo foram usados para estudar as propriedades térmicas e mecânicas dos filmes, observando-se a dependência da composição e do grau de orientação. Resultados da análise térmica por DSC indicaram que a concentração de carga, assim como a orientação do filme, exerce pouca influência tanto na temperatura de fusão Tm quanto no grau de cristalinidade. Resultados do ensaio de tração mostraram que o módulo de elasticidade dos filmes compósitos com maior concentração de carga diminui na direção longitudinal e aumenta na transversal. Quanto à resistência ao rasgo, o efeito do aumento da concentração de carga e de orientação foi o de incrementar essa propriedade.

Palavras-chave

Compósitos, filmes, reciclagem, polipropileno, poliestireno de alto impacto

Abstract

Ternary composites from post-consumer waste of polypropylene (PP), high impact polystyrene (HIPS) and calcium carbonate (CaCO3) were prepared to obtain films of synthetic paper and to evaluate their thermal and mechanical properties. These composites filled with 10, 20 and 30 % wt of CaCO3 were film blown extruded under two conditions of screw rotation: 32 and 51 rpm. The composite film orientation was determined with the parameters along the longitudinal axis (R1), transverse axis (Rt) and R1/Rt ratio (Rc). Differential scanning calorimetry (DSC) and tensile and tear strength tests were used to study the thermal and mechanical properties of the films, showing their dependence on composition and orientation degree. Composite films with higher filler concentration exhibited a decreased tensile strength, but a less significant effect on tensile modulus. The tear strength was strongly dependent on the degree of film orientation.

Keywords

Composites, films, recycling, polypropylene, high impact polystyrene

References



1. Sousa, J. A. & Ciminelli, R. R., “Plásticos carregados e reforçados”, apostila do curso organizado pela Associação Brasileira de Polímeros, São Paulo, de 6 a 8 de junho (1995).

2. Rabello, M., “Aditivação de Polímeros”, Artliber Editora Ltda., São Carlos, (2000).

3. Rybnikár. F. - J. Appl. Polym. Sci., 42, p. 2727 (1991).

4. Ren, Z.; Shank, R.A.& Rook, T.J.- J. Appl. Polym. Sci., 79, p. 1942, (2001).

5. Naiki, M.; et al. - J. Appl. Polym. Sci., 79, p. 1693, (2001).

6. Premphet, K. & Horanont, P.- J. Appl. Polym. Sci., 76, p. 1929, (2000).

7. García-López, D.; Merino & Pastor, J. M. - J. Appl. Polym. Sci., 88, p. 947, (2003).

8. Liang, J. - J. Appl. Polym. Sci., 83, p. 1547, (2002).

9. Mai, K; Wang, K; Han, Z. & Zeng, H. - J. Appl. Polym. Sci., 83, p. 1643, (2002).

10. Mannar, S. M. - Synthetic paper and a process for making it. European Patent 0605938A1, (1994).

11. Desai, S. - Synthetic writable paper- a need of the time”, Popular Plastic&Packaging, Nov., p.45-49, (1994).

12. Ohno, et al. - Synthetic paper with multi-layer structure and excellent printing property. European Patent Appl., No. 95102507.1, december 6, (1995).

13. Nan et al. - Manufacture of biaxially oriented polypropylene synthetic paper with pearl glossiness used as packaging material, involves preheating, annealing and drawing extruded paper in vertical and horizontal directions, International Published under the Patent Cooperation Treaty (PCT), No. WO95/16575, June, 22, (1995).

14. Johnston, G. D. - Laminated printing sheets, International Patent, Derwent, No. TW405002-A, Sept. 11, (2000).

15. Shibata et al. - Processes for treating a surface of a thermoplastic resin film, US Patent&Trademark Office, No. 6,217,687, April 17, (2001).

16. Lin, F. - Process of 3-layer co-extruded biaxial oriented polypropylene (BOPP) synthetic paper, US Patent, No. 5,552,011, Sept. 3, (1996).

17. Lin, F. - Process for the production of a biaxially oriented polypropylene synthetic paper of high gloss and easydrying printability, US Patent&Trademark Office, No. 6,001,290, Dez, 14, (1999).

18. Eckart, et al. - Method of manufacturing filler containing polymer film suitable for printing on, US Patent&Trademark Office, No. 6.083.443, July, 4, (2000).

19. Lin, F. - The manufacture method of bi-orientation polypropylene (BOPP) synthetic paper fabricated by three layer co-extrusion, International Patent, Derwent, No. TW405002-A, Sept. 11, (2000).

20. Huang, H.W. - Synthetic paper and method for its manufacture, European Patent Application No. 95118061.1, May, 14, (1997).

21. Moseley, III. - Polypropylene film suitable for use in inmolde labeling process, US Patent&Trademark Office, No6,228,316, May 8, (2001).

22. Amon, M. - Opaque polymeric films and processes for making same, US Patent&Trademark Office, No. 66,183,856, (2001).

23. Ota, S. et al. - Thermal recording media and void-containing polyolefin films for use therein, US Patent&Trademark Office, No. 6,136,750, Oct. 24, (2000).

24. Cantor, K. - Plástico Moderno., 4883, (2001).

25. Rosato, D. V. & Rosato, D. V. - Blown molding handbook, Hanser Publishers, p.614-618, (1988).

26. Benning, C. J. - PLASTIC Films for Packaging, Technology, Applications and Process Economics. Technomic Publishing Company, Inc., (1983).

27. Danella, O. - O desenvolvimento e carcaterização de Compósitos de polipropileno para Papel Sintético. Dissertação de Mestrado-DEMa-UFSCar, Setembro, (2001).

28. Legros, N. et al. - “Tensile properties and orientation evolution with processing conditions in polyethylene blown films”, in CD do ANTEC, (1998).

29. Patel, R. M. et al. - Polymer Eng. And Science, V.34, N.19, p.1506-1514, (1994).

30. Krishnaswamy, R. K & Sukhadia, A. M. - Polymer, V.41, p. 9205-9217, (2000).
588371067f8c9d0a0c8b46ba polimeros Articles
Links & Downloads

Polímeros: Ciência e Tecnologia

Share this page
Page Sections