Polímeros: Ciência e Tecnologia
https://app.periodikos.com.br/journal/polimeros/article/doi/10.1590/S0104-14282004000100012
Polímeros: Ciência e Tecnologia
Scientific & Technical Article

Correlação Entre as Propriedades Reológicas, Óticas e a Morfologia de Filmes Soprados de LLDPE/LDPE

Correlation Between Rheological and Optical Properties and the Morphology of Blown Films of LLDPE/LDPE

Guerrini, Lilia M.; Paulin Filho, Pedro I.; Bretas, Rosario E. S.; Bernardi, Alessandro

Downloads: 1
Views: 960

Resumo

Neste trabalho correlações entre as propriedades reológicas e óticas e a morfologia de filmes soprados de polietileno linear de baixa densidade, LLDPE, e de suas blendas com 10% e 20 % de polietileno de baixa densidade, LDPE, foram pesquisadas. Os filmes foram processados em uma sopradora industrial. As propriedades reológicas estudadas foram : a viscosidade em regime permanente de cisalhamento, η(γ) & , a primeira diferença de tensões normais, N1 (γ) , o módulo complexo em cisalhamento, G* (ω) e a deformação recuperável, γr (t). η (γ ) & e ( ) 1 γ& N foram medidos num reômetro de deformação controlada com cone e placa (taxas baixas) e num capilar (taxas elevadas); G* (ω) e γr (t) foram medidos num reômetro de tensão controlada com placas paralelas. As propriedades óticas (brilho e opacidade) foram medidas num opacímetro. As morfologias superficiais dos filmes soprados foram analisadas por microscopia eletrônica de varredura e microscopia de força atômica. Uma correlação entre deformação recuperável, opacidade total e morfologia dos filmes das blendas de LLDPE/LDPE foi obtida: quanto maior a recuperação elástica, menor a opacidade total e menor o tamanho do cristalito. A adição do LDPE ao LLDPE aumentou a deformação recuperável das blendas, diminuindo as suas opacidades.

Palavras-chave

Filmes soprados, propriedades reológicas, propriedades óticas, polietileno linear de baixa densidade, polietileno de baixa densidade

Abstract

In this work, correlations between the rheological and optical properties and the morphology of blow films of blends of linear low density, LLDPE, and low density polyethylene, LDPE, were studied. The films were blown in an industrial film blowing line. Rheological properties of the blends, such as shear steady state viscosity, η(γ) & , first normal stress difference, N1 γ & N , shear complex modulus, G* (ω) and recoverable strain, γr (t) were analyzed. η (γ ) & and N1 γ& N were measured in a strain controlled rheometer with cone and plate geometry (low shear rates) and in a capillary rheometer (hig shear rates); on the other hand, G* (ω) and γr (t) were measured in a tension controlled rheometer with parallel plates geometry. The optical properties (specular gloss and haze) were also measured in standard equipment. The surface morphology of the blown films was analyzed by scanning electron and atomic force microscopes. A correlation between recoverable strain, total haze and surface morphology of the blown films was obtained: the higher the recoverable strain, the lower the total haze and the smaller the crystallites. The addition of the LDPE to the LLDPE increased the recoverable strain of the films, decreasing their haze.

Keywords

Blow films, rheological properties, optical properties, linear low density polyethylene, low density polyethylene

References



1. Middleman, S. - “Fundamentals of Polymer Processing”, McGraw Hill, New York, (1977).

2. Bretas, R. E. S., D’Avila M. A. -“Reologia de Polímeros Fundidos”, EDUFSCar, São Carlos, (2000).

3. Pimentel, R. O. - “Correlação entre processamento e orientação molecular de filmes de polietileno produzidos por sopro”, Dissertação, Universidade Federal de São Carlos, Brasil, (2001).

4. Peacock, A. J. - “ Handbook of Polyethylene: Structure, Properties and Applications”, Marcel Deker, New York, (2000).

5. Thibault, C.; Haudin J. M.; André J., M.; Ernest, B. - “Morphological and crystallographic texture in polyethylene blown films. Influence on mechanical and optical properties”, in: 17 th Annual Meeting of the Polymer Processing Society, CD-ROM, Montreal (2001).

6. Johnson, M. B.; Wilkes G. L.; Sukhadia A. M.; Rohlifing D. C. - J. Appl. Polym. Sci., 77, p. 2845, (2000).

7. Sukhadia, A. M.; Rohlfing, D. C.; Johnson M. B.; Wilkes, G. L. - J. Appl. Polym. Sci., 85, 11, p. 2396, (2002).

8. Jordens, K. - “The influence of small amounts of LDPE on the morphology and resulting haze of LLDPE blown films”, in: Annual Technical Conference of the Society of Plastics Engineers, CD-ROM, San Francisco, (2002).

9. Fang, Y.; Carreau, P. J.; Lafleur, P. G. - “Rheological effects in film blowing”, in: 17 th Annual Meeting of the Polymer Processing Society,CD-ROM, Montreal, (2001).

10. Hussein, A. J.; Willians, C. M. - Polym. Eng. Sci., 41, 4, p. 696, (2001).

11. Kazatchkov, I. B; Bohnet, N.; Goyal, S. K.; Hatzikiriakos, S. G. - Polym. Eng. Sci., 39, 4, p. 804, (1999).

12. Abrahan D.; George K. E.; Francis D. J. - J. Appl. Polym. Sci., 62, p. 59, (1996).

13. Becker, M.; Forte, M. M. C.; Baumhardt Nto. R. B. - Polímeros: Ciência e Tecnologia, 12, 2, p. 85, (2002).

14. Stark, P.; Malmberg, A.; Löfgren B. - J. Appl. Polym. Sci., 83, 5, p.1140, (2002).

15. Yamaguchi, M.; Abe, S. - J. Appl. Polym. Sci., 74, 13, p. 3160, (1999).

16. Silva L.; Bretas R. E. S. - Polym Eng. Sci., 40, 6, p. 1414, (2000).

17. Utracki, L. A.; Shlund B. - Polym. Eng. Sci., 27, 5, p 367, (1987).

18. Dealy, J. M., Wissbrun K. J., - “Melt Rheology and Its Role in Plastics Processing”, London: Chapman & Hall, (1995).
588370f67f8c9d0a0c8b4669 polimeros Articles
Links & Downloads

Polímeros: Ciência e Tecnologia

Share this page
Page Sections