Scaffold based on castor oil as an osteoconductive matrix in bone repair: biocompatibility analysis
Fabianne Soares Lima; Luis Felipe Matos; Isnayra Kerolaynne Pacheco; Fernando Reis; João Victor Frazão Câmara; Josué Junior Araujo Pierote; José Milton Matos; Alessandra Ribeiro; Walter Moura; Ana Cristina Fialho
Abstract
Keywords
References
1 Perier-Metz, C., Duda, G. N., & Checa, S. (2020). Mechano-biological computer model of scaffold-supported bone regeneration: effect of bone graft and scaffold structure on large bone defect tissue patterning.
2 Jeong, H., Gwak, S., Seo, K. D., Lee, S., Yun, J., Cho, Y., & Lee, S. (2020). Fabrication of three-dimensional composite scaffold for simultaneous alveolar bone regeneration in dental implant installation.
3 Fernandes, H. R., Gaddam, A., Rebelo, A., Brazete, D., Stan, G. E., & Ferreira, J. M. F. (2018). Bioactive glasses and glass-ceramics for healthcare applications in bone regeneration and tissue engineering.
4 Sergi, R., Bellucci, D., & Cannillo, V. (2020). A review of bioactive glass/natural polymer composites: state of the art.
5 Taale, M., Schütt, F., Zheng, K., Mishra, Y. K., Boccaccini, A. R., Adelung, R., & Selhuber-Unkel, C. (2018). Bioactive carbon-based hybrid 3d scaffolds for osteoblast growth.
6 Keong, L. C., & Halim, A. S. (2009). In vitro models in biocompatibility assessment for 6 biomedical-grade chitosan derivatives in wound management.
7 Moura, F. N., No., Fialho, A. C. V., Moura, W. L., Rosa, A. G. F., Matos, J. M. E., Reis, F. S., Mendes, M. T. A., & Sales, E. S. D. (2019). Castor polyurethane used as osteosynthesis plates: microstructural and thermal analysis.
8 Pacheco, I. K. C., Reis, F. S., Carvalho, C. E. S., Matos, J. M. E., Argolo, N. M., No., Baeta, S. A. F., Silva, K. R., Dantas, H. V., Sousa, F. B., & Fialho, A. C. V. (2021). Development of castor polyurethane scaffold (Ricinus communis L.) and its effect with stem cells for bone repair in an osteoporosis model.
9 Morais, J. P. P., Pacheco, I. K. C., Maia, A. L. M., Fo., Ferreira, D. C. L., Viana, F. J. C., Reis, F. S., Matos, J. M. E., Rizzo, M. S., & Fialho, A. C. V. (2021). Polyurethane derived from castor oil monoacylglyceride (Ricinus communis) for bone defects reconstruction: characterization and in vivo testing.
10 Merck. (1990).
11 Kalegari, M., Miguel, M. D., Dias, J. F. G., Lordello, A. L. L., Lima, C. O., Miyazaki, C. M. S., Zanin, S. M. W., Verdam, M. C. S., & Miguel, O. G. (2011). Phytochemical constituents and preliminary toxicity evaluation of leaves from Rourea induta Planch. (Connaraceae).
12 Grilo, K. T. M. (2016).
13 Hou, Y., Wang, X., Yang, J., Zhu, R., Zhang, Z., & Li, Y. (2018). Development and biocompatibility evaluation of biodegradable bacterial cellulose as a novel peripheral nerve scaffold.
14 Clinical and Laboratory Standards Institute – CLSI. (2005).
15 Shah, F. A., Thomsen, P., & Palmquist, A. (2018). A review of the impact of implant biomaterials on osteocytes.
16 Weber, M., Steinle, H., Golombek, S., Hann, L., Schlensak, C., Wendel, H. P., & Avci-Adali, M. (2018). Blood-contacting biomaterials: in vitro evaluation of the hemocompatibility.
17 Zhu, T., Cui, Y., Zhang, M., Zhao, D., Liu, G., & Ding, J. (2020). Engineered threedimensional scaffolds for enhanced bone regeneration in osteonecrosis.
18 Kawai, T., Shanjani, Y., Fazeli, S., Behn, A. W., Okuzu, Y., Goodman, S. B., & Yang, Y. P. (2018). Customized, degradable, functionally graded scaffold for potential treatment of early stage osteonecrosis of the femoral head.
19 Wang, G., Li, Y., Sun, T., Wang, C., Qiao, L., Wang, Y., Dong, K., Yuan, T., Chen, J., Chen, G., & Sun, S. (2019). BMSC affinity peptide-functionalized β-tricalcium phosphate scaffolds promoting repair of osteonecrosis of the femoral head.
20 Tan, A. C. W., Polo-Cambronell, B. J., Provaggi, E., Ardila-Suárez, C., Ramirez-Caballero, G. E., Baldovino-Medrano, V. G., & Kalaskar, D. M. (2018). Design and development of low cost polyurethane biopolymer based on castor oil and glycerol for biomedical applications.
21 Patel, V. R., Dumancas, G. G., Viswanath, L. C. K., Maples, R., & Subong, B. J. J. (2016). Castor oil: properties, uses, and optimization of processing parameters in commercial production.
22 Oryan, A., Alidadi, S., Moshiri, A., & Maffulli, N. (2014). Bone regenerative medicine: classic options, novel strategies, and future directions.
23 McLaren, J. S., White, L. J., Cox, H. C., Ashraf, W., Rahman, C. V., Blunn, G. W., Goodship, A. E., Quirk, R. A., Shakesheff, K. M., Bayston, R., & Scammell, B. E. (2014). A biodegradable antibiotic-impregnated scaffold to prevent osteomyelitis in a contaminated in vivo bone defect model.
24 Yang, K., Han, Q., Chen, B., Zheng, Y., Zhang, K., Li, Q., & Wang, J. (2018). Antimicrobial hydrogels: promising materials for medical application.
25 Kamaruzzaman, N. F., Tan, L. P., Hamdan, R. H., Choong, S. S., Wong, W. K., Gibson, A. J., Chivu, A., & Pina, M. F. (2019). Antimicrobial polymers: the potential replacement of existing antibiotics?
26 Pramanik, S., Ataollahi, F., Pingguan-Murphy, B., Oshkour, A. A., & Osman, N. A. A. (2015). In vitro study of surface modified poly(ethylene glycol)-impregnated sintered bovine bone scaffolds on human fibroblast cells.
27 Turnbull, G., Clarke, J., Picard, F., Riches, P., Jia, L., Han, F., Li, B., & Shu, W. (2017). 3D bioactive composite scaffolds for bone tissue engineering.
28 Qasim, M., Chae, D. S., & Lee, N. Y. (2019). Advancements and frontiers in nano-based 3D and 4D scaffolds for bone and cartilage tissue engineering.