Alternative materials to shorten injection mold manufacturing and molding cycles

Adriano Fagali de Souza; Janaina Lisi Leite Howarth; Bruno Edu Arendarchuck; Alexandre Mateus Popiolek; Claudio Antonio Treml Junior; Crislaine Kavilha

doi:10.1590/0104-1428.20230088

Original Article

Alternative materials to shorten injection mold manufacturing and molding cycles

Adriano Fagali de Souza; Janaina Lisi Leite Howarth; Bruno Edu Arendarchuck; Alexandre Mateus Popiolek; Claudio Antonio Treml Junior; Crislaine Kavilha

http://dx.doi.org/10.1590/0104-1428.20230088 Polímeros: Ciência e Tecnologia, vol.34, n2, e20240023, 2024

PDF

SciELO

Downloads: 0

Abstract

This paper investigates mold materials for polypropylene (PP) injection molding, including CuBe alloy (high thermal conductivity), AISI P20 mold steel (the conventional material for injection molds), and polyurethane resin (rapid tooling). Characterization of molded parts involved microstructural analysis, tensile tests, warping, and degree of crystallinity assessments. The results show that the higher thermal conductivity of the mold’s inserts reduced the injection molding cycle time and produced thicker skins, which resulted in smaller spherulite sizes in the core of the samples, reduced the crystallinity degree, and consequently reduced the maximum strain property. The thermal conductivity of the molds’ inserts was shown to be more significative than the skin thickness and mold temperature for the size of the spherulites when they are formed. In addition, CuBe alloys showed to be a strong competitor with additive manufacturing-produced molds with conformal cooling channels to reduce injection molding cycle time.

Keywords

CuBe alloys, injection molding, mold materials, processing cycle time

References

1 Chen, J.-Y., Tseng, C.-C., & Huang, M.-S. (2019). Quality indexes design for online monitoring polymer injection molding. Advances in Polymer Technology, 2019, 3720127. http://doi.org/10.1155/2019/3720127.

2 Marin, F., Souza, A. F., Ahrens, C. H., & de Lacalle, L. N. L. (2021). A new hybrid process combining machining and selective laser melting to manufacture an advanced concept of conformal cooling channels for plastic injection molds. International Journal of Advanced Manufacturing Technology, 113(5-6), 1561-1576. http://doi.org/10.1007/s00170-021-06720-4.

3 Bozdana, A. T., & Eyerci̇oğlu, Ö. (2002). Development of an expert system for the determination of injection moulding parameters of thermoplastic materials: EX-PIMM. Journal of Materials Processing Technology, 128(1-3), 113-122. http://doi.org/10.1016/S0924-0136(02)00436-3.

4 Brito, A. M., Cunha, A. M., Pouzada, A. S., & Crawford, R. J. (1991). Predicting the skin-core boundary location in injection moldings. International Polymer Processing, 6(4), 370-377. http://doi.org/10.3139/217.910370.

5 Farotti, E., & Natalini, M. (2018). Injection molding: influence of process parameters on mechanical properties of polypropylene polymer: a first stud. Procedia Structural Integrity, 8, 256-264. http://doi.org/10.1016/j.prostr.2017.12.027.

6 Altaf, K., Rani, A. M. A., Ahmad, F., Baharom, M., & Raghavan, V. R. (2016). Determining the effects of thermal conductivity on epoxy molds using profiled cooling channels with metal inserts. Journal of Mechanical Science and Technology, 30(11), 4901-4907. http://doi.org/10.1007/s12206-016-1055-z.

7 Viana, J. C. (2004). Development of the skin layer in injection moulding: phenomenological model. Polymer, 45(3), 993-1005. http://doi.org/10.1016/j.polymer.2003.12.001.

8 Karger-Kocsis, J., & Bárány, T. (Eds.). (2019). Polypropylene handbook: morphology, blends and composites. Switzerland: Springer.. http://doi.org/10.1007/978-3-030-12903-3.

9 Lee, J. J., & Cha, S. W. (2006). Characteristics of the skin layers of microcellular injection molded parts. Polymer-Plastics Technology and Engineering, 45(7), 871-877. http://doi.org/10.1080/03602550600611768.

10 Baltes, L., Costiuc, L., Patachia, S., & Tierean, M. (2019). Differential scanning calorimetry: a powerful tool for the determination of morphological features of recycled polypropylene. Journal of Thermal Analysis and Calorimetry, 138(4), 2399-2408. http://doi.org/10.1007/s10973-019-08679-7.

11 Strömberg, E., & Karlsson, S. (2009). The design of a test protocol to model the degradation of polyolefins during recycling and service life. Journal of Applied Polymer Science, 112(3), 1835-1844. http://doi.org/10.1002/app.29724.

12 Rizvi, S. J. A. (2017). Effect of injection molding parameters on crystallinity and mechanical properties of isotactic polypropylene. International Journal of Plastics Technology, 21(2), 404-426. http://doi.org/10.1007/s12588-017-9194-3.

13 van Renterghem, J., Dhondt, H., Verstraete, G., De Bruyne, M., Vervaet, C., & De Beer, T. (2018). The impact of the injection mold temperature upon polymer crystallization and resulting drug release from immediate and sustained release tablets. International Journal of Pharmaceutics, 541(1-2), 108-116. http://doi.org/10.1016/j.ijpharm.2018.01.053. PMid:29409747.

14 Suplicz, A., Szabo, F., & Kovacs, J. G. (2013). Injection molding of ceramic filled polypropylene: the effect of thermal conductivity and cooling rate on crystallinity. Thermochimica Acta, 574, 145-150. http://doi.org/10.1016/j.tca.2013.10.005.

15 Sperling, L. H. (2005). Introduction to physical polymer science. Hoboken: John Wiley & Sons. http://doi.org/10.1002/0471757128.

16 Cowie, J. M. G., & Arrighi, V. (2007). Polymers: chemistry and physics of modern materials. Boca Raton: CRC Press. http://doi.org/10.1201/9781420009873.

17 Menges, G., Michaeli, W., & Mohren, P. (2001). How to make injection molds. Munich: Hanser.

18 Fernandes, A. C., Souza, A. F., & Howarth, J. L. L. (2016). Mechanical and dimensional characterization of polypropylene injection moulded parts in epoxy resin/aluminium inserts for rapid tooling. International Journal of Materials & Product Technology, 52(1-2), 37-52. http://doi.org/10.1504/IJMPT.2016.073618.

19 Beal, V. E., Erasenthiran, P., Ahrens, C. H., & Dickens, P. (2007). Evaluating the use of functionally graded materials inserts produced by selective laser melting on the injection moulding of plastics parts. Proceedings of the Institution of Mechanical Engineers. Part B, Journal of Engineering Manufacture, 221(6), 945-954. http://doi.org/10.1243/09544054JEM764.

20 Apacki, K. C. (1995). Copper-alloy molds provide cycle time and quality advantages for injection molding and resin transfer molding (SAE Technical Paper, No. 950566). Warrendale: SAE International. doi:http://doi.org/10.4271/950566.

21 Kelly, A. L., Mulvaney-Johnson, L., Beechey, R., & Coates, P. D. (2011). The effect of copper alloy mold tooling on the performance of the injection molding process. Polymer Engineering and Science, 51(9), 1837-1847. http://doi.org/10.1002/pen.21975.

22 Marques, S., Souza, A. F., Miranda, J., & Yadroitsau, I. (2015). Design of conformal cooling for plastic injection moulding by heat transfer simulation. Polímeros, 25(6), 564-574. http://doi.org/10.1590/0104-1428.2047.

23 Huzaim, N. H. M., Rahim, S. Z. A., Musa, L., Abdellah, A. E., Abdullah, M. M. A. B., Rennie, A., Rahman, R., Garus, S., Błoch, K., Sandu, A. V., Vizureanu, P., & Nabiałek, M. (2022). Potential of rapid tooling in rapid heat cycle molding: a review. Materials (Basel), 15(10), 3725. http://doi.org/10.3390/ma15103725. PMid:35629751.

24 Huntsman Advanced Materials. (2007, June 3). RenShape® 5166: datasheet. Switzerland: Huntsman Advanced Materials Americas Inc.

25 American Society for Testing and Materials – ASTM. (2022). ASTM D638-22: standard test method for tensile properties of plastics. West Conshohocken: ASTM International.

26 Kong, Y., & Hay, J. N. (2003). The enthalpy of fusion and degree of crystallinity of polymers as measured by DSC. European Polymer Journal, 39(8), 1721-1727. http://doi.org/10.1016/S0014-3057(03)00054-5.

27 Ujhelyiová, A., Horbanová, Ľ., Petková, M., Ryba, J., & Annus, J. (2019). Polypropylene crystallisation in the presence of inorganic additives. Fibres & Textiles in Eastern Europe, 27(2), 30-38. http://doi.org/10.5604/01.3001.0012.9984.

28 Marin, F., Miranda, J. R., & Souza, A. F. (2018). Study of the design of cooling channels for polymers injection molds. Polymer Engineering and Science, 58(4), 552-559. http://doi.org/10.1002/pen.24769.

29 Callister, W. D., Jr., & Rethwisch, D. G. (2018). Materials science and engineering: an introduction. Brisbane: John Wiley & Sons.

Alternative materials to shorten injection mold manufacturing and molding cycles

Adriano Fagali de Souza; Janaina Lisi Leite Howarth; Bruno Edu Arendarchuck; Alexandre Mateus Popiolek; Claudio Antonio Treml Junior; Crislaine Kavilha

Abstract

Keywords

References

Links

Share

Polímeros: Ciência e Tecnologia