Síntese de Látices com Baixa Concentração de Compostos Orgânicos Voláteis (COVs): Efeito das Técnicas de Redução dos COVs nas Propriedades dos Látexes e das Tintas
Synthesis of Latexes with Low Concentration of Volatile Organic Compounds (VOCs): Effect of Reduction Techniques of VOCs on the Properties of Latexes and Paints
Oliveira, Mauricio Pinheiro de; Silva, Caroline Reggiani da
http://dx.doi.org/10.1590/0104-1428.1506
Polímeros: Ciência e Tecnologia, vol.24, n4, p.478-485, 2014
Resumo
A redução dos compostos orgânicos voláteis (COVs) nos látices produzidos via polimerização em emulsão é uma opção viável, mas em algumas situações pode comprometer a qualidade do látex. Diferentes técnicas de redução da concentração dos monômeros e dos COVs foram estudadas com o objetivo de entender o efeito destas técnicas e da concentração dos COVs nas propriedades de aplicação dos látices e das tintas. Os látices de estireno com acrilato de 2-etil hexila funcionalizados com ácido acrílico e acrilamida foram produzidos via polimerização em emulsão, seguido por remoção química, física e a combinação de ambas as técnicas de redução dos monômeros e dos COVs. Os parâmetros relacionados à técnica de redução dos COVs, ao tipo de iniciador, ao agente de redução e à introdução de nitrogênio saturado com vapor de água foram estudados e correlacionados com as propriedades de aplicação das tintas. A combinação da técnica química com a técnica física foi mais eficiente na redução dos monômeros e dos COVs nos látices. As técnicas utilizadas na redução dos COVs tiveram influência negativa nas propriedades de aplicação dos látices. A resistência à abrasão dos filmes de tinta foi dependente da técnica empregada e da concentração dos COVs.
Palavras-chave
Polimerização em emulsão, pós-polimerização, compostos orgânicos voláteis (COVs), resistência à
abrasão, tinta decorativa.
Abstract
The reduction of volatile organic compounds (VOCs) in the latexes produced by emulsion polymerization is a viable option, but it may compromise the performance of the latex in some situations. Different techniques for reduction of residual monomers and VOCs concentrations were studied for understanding the effect of these techniques and VOCs concentrations on the application properties of latexes and paints. Styrene/2-ethylhexyl acrylate latices functionalized with acrylic acid and acrylamide were produced by emulsion polymerization, followed by removal of residues and other VOCs with a chemical or physical technique, or with the combination of both. The effect of various parameters related to reduction techniques of VOCs, type of initiator, reducing agent and nitrogen stripping with steam were studied and correlated with the properties of latexes and paints. The combination of chemical and physical techniques was more effective for reducing the monomers and VOCs to latexes. The techniques employed for reduction of VOCs had a negative effect on the end-use properties of latex and paints. The abrasion resistance of the paint film was dependent on the technique employed and on VOCs concentration.
Keywords
Emulsion polymerization, post polymerization, volatile organic compounds (VOCs), abrasion resistance,
decorative paint.
References
1. Oliveira, M. P.; Kita, A. & Silva, C. R. - Paint & Pintura, 171, p.92 (2012).
2. Uemoto, K. L.; Ikematsu, P. & Agopyan, V. - “Impacto ambiental das tintas imobiliárias”, in: Construção e Meio Ambiente, cap.3, Sattler, M. & Pereira, F.O.R. (ed.), Associação Nacional de Tecnologia do Ambiente Construído, Porto Alegre (2006).
3. Jie, Y.; Ismail, N. H. & Isa, Z. M. - J. Formos. Med. Assoc., 110, p.555 (2011). PMid:21930065. http://dx.doi. org/10.1016/j.jfma.2011.07.003
4. EUR-Lex - “Directive 2004/42/CE of the European Parliament and the Council”. European Union Publications Office. (2007).
5. United States Environmental Protection Agency - EPA - “An introduction to indoor air quality volatile organic compounds”. EPA. Disponível em
6. Green Seal - “GS-11: Green Seal standard for paints and coatings”. Washington , p.1-16 (2010).
7. Richey, B. & Burch, M. - “Applications for decorative and protective coatings”, in: Polymer dispersions and their industrial applications, cap.6, Urban, D. & Takamura, K. (ed.), Wiley-VCH Verlag GmbH, Weinheim (2002). http:// dx.doi.org/10.1002/3527600582.ch6
8. Ilundain, P.; Cunha, L.; Salazar, R.; Alvarez, D.; Barandiaran, M.J. & Asua, J.M. - J. Appl. Polym. Sci., 83, p.923 (2002). http://dx.doi.org/10.1002/app.10151
9. Araújo, P. H. H.; Sayer, C.; Poço, J. G. R. & Giudici, R. - Polym. Eng. Sci., 42, p.1442 (2002). http://dx.doi. org/10.1002/pen.11043
10. Barandiaran, M. J. & Asua, J. M. “Removal of Monomers and VOCs from Polymers” in: Handbook of polymer reaction engineering, cap.18, Meyer, T.H. & Keurentjes, J. (ed.), Wiley-VCH Verlag GmbH, Weinheim (2008).
11. Hirota, W. H.; Reis, M. M.; Sayer, C. & Giudici, R. - Polímeros, 14, p.51 (2004). http://dx.doi.org/10.1590/ S0104-14282004000100014
12. Kechagia, Z.; Kammona, O.; Pladis, P.; Alexopoulos, A. H. & Kiparissides, C. - Macromol. React. Eng. 5, p.479 (2011). http://dx.doi.org/10.1002/mren.201100025
13. Ilundain, P.; Alvarez, D.; Cunha, L.; Salazar, R.; Barandiaran, M. J. & Asua, J. M. - J. Polym. Sci. Part. A: Polym. Chem., 40, p.4245 (2002). http://dx.doi. org/10.1002/pola.10506
14. Cunha, L.; Ilundain, P.; Salazar, R.; Alvarez, D.; Barandiaran, M.J. & Asua, J.M. - Polymer, 42, p.391 (2001).
15. Salazar, R.; Ilundain, P.; Alvarez, D.; Cunha, L.; Barandiaran, M. J. & Asua, J. M. - Ind. Eng. Chem. Res., 44, p.4042 (2005). http://dx.doi.org/10.1021/ie050151g
16. Aerts, M.; Meuldijk, J.; Kemmere, M. & Keurentjes, J. - J. Macromol. Symp., 302, p.297 (2011). http://dx.doi. org/10.1002/masy.201000052
17. Oliveira, M. P.; Silva, C. R. & Guerrini, L. M.- J. Coat. Technol. Res., 8, p.439 (2011). http://dx.doi.org/10.1007/ s11998-010-9317-7
18. Chai, X. S.; Hou, Q. X. & Schork, F. J. - J. Chromatogr. A, 1040, p.163 (2004). http://dx.doi.org/10.1016/j. chroma.2004.04.024
19. International Organization for Standardization - ISO. - “Paint and varnishes: determination of Volatile Organic Compound (VOC) content. Part 2: Gaschromatographic method”. (2013). (ISO 11890-2).
20. Assossiação Brasileira de Normas Técnicas - ABNT. - “Tintas para construção civil. Método para avaliação de desempenho de tintas para edificações não industriais. Determinação da resistência à abrasão úmida”, ABNT (2003). (NBR 14940).
21. Vanderhoff, J. W. - Chem. Eng. Sci., 48, p.203 (1993). http://dx.doi.org/10.1016/0009-2509(93)80009-F
22. Wilkinson, M. C.; Hearn, J. & Steward, P. A. - Adv. Colloid Interf. Sci., 81, p.77 (1999). http://dx.doi.org/10.1016/ S0001-8686(98)00084-0
23. Chang, J. C. S.; Fortmann, R.; Roache, N. & Lao, H. C. - Indoor Air, 9, p.253 (1999). PMid:10649858. http:// dx.doi.org/10.1111/j.1600-0668.1999.00004.x
24. Everett, D. H.; Gultepe, M. E. & Wilkinson, M. C. - J. Colloid Interf. Sci., 71, p.336 (1979). http://dx.doi. org/10.1016/0021-9797(79)90244-3
25. Khan, A. K.; Roy, B. C. & Dolui, S. K. - J. Sci., Ind. Res., 65, p.744 (2006).
26. Wildeson, J.; Smith, A.; Gong, X.; Davis, H. T. & Scriven, L. E. - J. Coat. Tech., 5, p.32 (2008).