Rheological properties of low-density polyethylene filled with hydrophobic Co(Ni)-Al layered double hydroxides
Jaerger, Silvia; Leuteritz, Andreas; Freitas, Rilton Alves de; Wypych, Fernando
Abstract
Cobalt/aluminum and nickel/aluminum layered double hydroxide (LDH - M+2:Al molar ratio of 3:1) were intercalated with dodecylsulphate (DDS), laurate (LAU), stearate (STE) and palmitate (PAL) and used as filler in low-density polyethylene (LDPE) in percentages between 0.2 and 7.0wt%. After injection molding, the samples were submitted to morphological characterization by scanning electron microscopy (SEM), analysis of thermal behavior by differential scanning calorimetry (DSC) and investigation of rheological properties. All Co/Al-LDPE samples showed the formation of a high temperature polymer crystal domain, induced by the LDH filler. The rheological properties indicated in general a reduction of shear modulus due to incompatibility between some regions of LDH and LDPE, which promoted phase separation. However, interaction with the LDH surface indicated higher affinity of the Ni/Al-LDH for the LDPE compared to Co/Al-LDH, forming permanent networks.
Keywords
References
1 Jia, C., Qian, Y., Chen, X., & Liu, Y. (2014). Flame retardant ethylene-vinyl acetate composites based on layered double hydroxides with zinc hydroxystannate. Polymer Engineering and Science, 54(12), 2918-2924. http://dx.doi.org/10.1002/pen.23849.
2 Peres, A. M., Pires, R. R., & Oréfice, R. L. (2016). Evaluation of the effect of reprocessing on the structure and properties of low density polyethylene/thermoplastic starch blends. Carbohydrate Polymers, 136(20), 210-215. http://dx.doi.org/10.1016/j.carbpol.2015.09.047. PMid:26572348.
3 Mathioudakis, I. G., Vogiatzis, G. G., Tzoumanekas, G. G., & Theodorou, D. N. (2016). Molecular modeling and simulation of polymer nanocomposites at multiple length Scales. IEEE Transactions on Nanotechnology, 15(3), 416-422. http://dx.doi.org/10.1109/TNANO.2016.2538460.
4 Peng, D., Wei, C., & Baojun, Q. (2006). Recent progress in polymer layered double hydroxide nanocomposites. Progress in Natural Science, 16(6), 573-579. http://dx.doi.org/10.1080/10020070612330037.
5 Ding, P., & Qu, B. (2006). Synthesis of exfoliated PP/LDH nanocomposites via melt-intercalation: structure, thermal properties, and photo-oxidative behavior in comparison with PP/MMT nanocomposites. Polymer Engineering and Science, 46(9), 1153-1159. http://dx.doi.org/10.1002/pen.20568.
6 Jeon, I. Y., & Baek, J. B. (2010). Nanocomposites derived from polymers and inorganic nanoparticles. Materials, 3(6), 3654-3674. http://dx.doi.org/10.3390/ma3063654. [ Links ]
7 Nogueira, T., Gonçalves, N., Botan, R., Wypych, F., & Lona, L. (2016). Layered double hydroxides as fillers in poly(l-lactide) nanocomposites, obtained by in situ bulk polymerization. Polímeros: Ciência e Tecnologia, 26(2), 106-114. http://dx.doi.org/10.1590/0104-1428.2282.
8 Tavares, S. R., Wypych, F., & Leitão, A. A. (2017). DFT study of the intercalation of layered double hydroxides and layered hydroxide salts with dodecylsulfate and dodecylbenzenesulfonate: exfoliation and hydration properties. Applied Clay Science, 143(1), 107-114. http://dx.doi.org/10.1016/j.clay.2017.03.018.
9 Nogueira, T. R., Botan, R., Macedo Neto, J. C., Wypych, F., & Lona, L. (2013). Effect of layered double hydroxides on the mechanical, thermal, and fire properties of poly(methyl methacrylate) nanocomposites. Advances in Polymer Technology, 32(S1), E660-E674. http://dx.doi.org/10.1002/adv.21309.
10 Jaerger, S., Zimmermann, A., Zawadzki, S. F., Wypych, F., & Amico, S. C. (2014). Zinc layered hydroxide salts: intercalation and incorporation into low-density polyethylene. Polímeros: Ciência e Tecnologia, 24(6), 673-682. http://dx.doi.org/10.1590/0104-1428.1733. [ Links ]
11 Silva, M. L. N., Marangoni, R., Silva, A. H., Wypych, F., & Schreiner, W. H. (2013). Poly(vinyl alcohol) composites containing layered hydroxide salts, intercalated with anionic azo dyes (Tropaeolin 0 and Tropaeolin 0). Polímeros: Ciência e Tecnologia , 23(2), 248-256. http://dx.doi.org/10.4322/S0104-14282013005000026. [ Links ]
12 Pérez, M. R., Pavlovic, I., Barriga, C., Cornejo, J., Hermosin, M. C., & Ulibarri, M. A. (2006). Uptake of Cu2+, Cd2+ and Pb2+ on Zn-Al layered double hydroxide intercalated with EDTA. Applied Clay Science, 32(3-4), 245-251. http://dx.doi.org/10.1016/j.clay.2006.01.008.
13 Yu, S., Wang, X., Chen, Z., Wang, J., Wang, S., Hayat, T., & Wang, X. (2016). Layered double hydroxide intercalated with aromatic acid anions for the efficient capture of aniline from aqueous solution. Journal of Hazardous Materials, 32, 111-120. http://dx.doi.org/10.1016/j.jhazmat.2016.09.009. PMid:27614324.
14 Stimpfling, T., Leroux, F., & Hintze-Bruening, H. (2014). Organo-modified layered double hydroxide in coating formulation to protect AA2024 from corrosion. Colloids and Surfaces. A, Physicochemical and Engineering Aspects, 458, 147-154. http://dx.doi.org/10.1016/j.colsurfa.2014.01.042.
15 Chen, Y., & Song, Y. F. (2013). Highly selective and efficient removal of Cr (VI) and Cu(II) by the chromotropic acid-intercalated Zn–Al layered double hydroxides. Industrial & Engineering Chemistry Research, 52(12), 4436-4442. http://dx.doi.org/10.1021/ie400108t.
16 Lonkar, S. P., Morlat-Therias, S., Caperaa, N., Leroux, F., Gardette, J. L., & Singh, R. P. (2009). Preparation and nonisothermal crystallization behavior of polypropylene/layered double hydroxide nanocomposites. Polymer, 50(6), 1505-1515. http://dx.doi.org/10.1016/j.polymer.2009.01.031.
17 Landman, E. P., & Focke, W. W. (2006). Stearate intercalated layered double hydroxides: effect on the physical properties of dextrin-alginate films. Journal of Materials Science, 41(8), 2271-2279. http://dx.doi.org/10.1007/s10853-006-7173-8.
18 Manzi-Nshuti, C., Songtipya, P., Manias, E., Jimenez-Gasco, M. M., Hossenlopp, J. M., & Wilkie, C. A. (2009). Polymer nanocomposites using zinc aluminum and magnesium aluminum oleate layered double hydroxides: Effects of LDH divalent metals on dispersion, thermal, mechanical and fire performance in various polymers. Polymer, 50(15), 3564-3574. http://dx.doi.org/10.1016/j.polymer.2009.06.014.
19 Cursino, A. C. T., Lisboa, F. S., Pyrrho, A. S., Souza, V. P., & Wypych, F. (2013). Layered double hydroxides intercalated with anionic surfactants/benzophenone as potential materials for sunscreens. Journal of Colloid and Interface Science, 397(1), 88-95. http://dx.doi.org/10.1016/j.jcis.2013.01.059. PMid:23481517.
20 Marangoni, R., Bouhent, R., Taviot-Gueho, C., Wypych, F., & Leroux, F. (2009). Zn 2Al layered double hydroxides intercalated and adsorbed with anionic blue dyes: a physico-chemical characterization. Journal of Colloid and Interface Science , 333(1), 120-127. http://dx.doi.org/10.1016/j.jcis.2009.02.001. PMid:19249793.
21 Marangoni, R., Mikowski, A., & Wypych, F. (2010). Effect of adsorbed/intercalated anionic dyes into the mechanical properties of PVA: layered zinc hydroxide nitrate nanocomposites. Journal of Colloid and Interface Science, 351(2), 384-391. http://dx.doi.org/10.1016/j.jcis.2010.08.006. PMid:20804981.
22 Costa, F. R., Wagenknecht, U., Jehnichen, D., Goad, M. A., & Heinrich, G.. (2006). Nanocomposites based on polyethylene and Mg-Al layered double hydroxide. Part II. Rheological characterization. Polymer, 47(5), 1649-1660. http://dx.doi.org/10.1016/j.polymer.2005.12.011.
23 Costa, F. R., Saphiannikova, M., Wagenknecht, U., & Heinrich, G. (2007). Layered double hydroxide based polymer nanocomposites. Advances in Polymer Science , 210, 101-168. http://dx.doi.org/10.1007/12_2007_123.
24 Costa, F. R., Abdel-Goad, M., Wagenknecht, U., & Heinrich, G. (2005). Nanocomposites based on polyethylene and Mg-Al layered double hydroxide. I. Synthesis and characterization. Polymer, 46(12), 4447-4453. http://dx.doi.org/10.1016/j.polymer.2005.02.027.
25 Costa, F. R., Wagenknecht, U., Jehnichen, D., & Heinrich, G. (2006). Nanocomposites based on polyethylene and Mg-Al layered double hydroxide: characterisation of modified clay, morphological and rheological analysis of nanocomposites. Plastics, Rubber and Composites, 35(4), 139-148. http://dx.doi.org/10.1179/174328906X103187.
26 Coiai, S., Scatto, M., Conzatti, L., Azzurri, F., Andreotti, L., Salmini, E., Stagnaro, P., Zanolin, A., Cicogna, F., & Passaglia, E. (2011). Optimization of organo-layered double hydroxide dispersion in LDPE-based nanocomposites. Polymers for Advanced Technologies , 22(12), 2285-2294. http://dx.doi.org/10.1002/pat.1759.
27 Kutlu, B., Leuteritz, A., Boldt, R., Jehnichen, D., Wagenknecht, U., & Heinrich, G. (2013). PANI-LDH prepared by polymerization–adsorption method and processing to conductive compounds. Applied Clay Science, 72, 91-95. http://dx.doi.org/10.1016/j.clay.2013.01.002.
28 Gao, Y, Wang, Q., Wang, J. Y., Huang, L., Yan, X. R., Zhang, X., He, Q. L., Xing, Z. P., & Guo, Z. H. (2014). Synthesis of highly efficient flame retardant high-density polyethylene nanocomposites with inorgano-layered double hydroxides as nanofiller using solvent mixing method. ACS Applied Materials & Interfaces, 6(7), 5094-5104. http://dx.doi.org/10.1021/am500265a. PMid:24597470.
29 Solomon, M. J., Almusallam, A. S., Seefeldt, K. F., Somwangthanaroj, A., & Varadan, P. (2001). Rheology of polypropylene/clay hybrid materials. Macromolecule , 34(6), 1864-1872. http://dx.doi.org/10.1021/ma001122e.
30 Lonkar, S. P., Therias, S., Leroux, F., Gardette, J. L., & Singh, R. P. (2012). Thermal, mechanical, and rheological characterization of polypropylene/layered double hydroxide nanocomposites. Polymer Engineering and Science, 52(9), 2006-2014. http://dx.doi.org/10.1002/pen.23147.
31 Zaman, H. U., & Beg, M. D. H. (2014). Influence of two novel compatibilizers on the properties of LDPE/organoclay nanocomposites. Journal of Polymer Engineering , 34(1), 1-9. http://dx.doi.org/10.1515/polyeng-2013-0144.
32 Lee, Y., & Porter, R. S. (1987). Double-melting behavior of poly(ether ether ketone). Macromolecule, 20(6), 1336-1341. http://dx.doi.org/10.1021/ma00172a028.
33 Jaerger, S., Zawadzki, S. F., Leuteritz, A., & Wypych, F. (2017). J. New alternative to produce colored polymer nanocomposites: organophilic Ni/Al and Co/Al layered double hydroxide as fillers into low-density polyethylene. Journal of the Brazilian Chemical Society . http://dx.doi.org/10.21577/0103-5053.20170093.