Heat transfer simulation for decision making in plastic injection mold design
Piery Antonio Gruber; Diego Alves de Miranda
Abstract
Keywords
References
1 Alfrey, T., & Gurnee, E. (1971).
2 Mercado-Colmenero, J. M., Rubio-Paramio, M. A., Marquez-Sevillano, J. J., & Martin-Doñate, C. (2018). A new method for the automated design of cooling systems in injection molds.
3 Clemente, M. R., & Panão, M. R. O. (2018). Introducing flow architecture in the design and optimization of mold inserts cooling systems.
4 Jahan, S. A., Wu, T., Zhang, Y., Zhang, J., Tovar, A., & Elmounayri, H. (2017). Thermo-mechanical design optimization of conformal cooling channels using design of experiments approach.
5 Corazza, E. J., Sacchelli, C. M., & Marangoni, C. (2012). Cycle time reduction of thermoplastic injection using nitriding treatment surface molds.
6 Hassan, H., Regnier, N., Arquis, E., & Defaye, G. (2016). Effect of cooling channels position on the shrinkage of plastic material during injection molding. In
7 Blass, A. (1988).
8 Oliaei, E., Heidari, B. S., Davachi, S. M., Bahrami, M., Davoodi, S., Hejazi, I., & Seyfi, J. (2016). Warpage and shrinkage optimization of injection-molded plastic spoon parts for biodegradable polymers using Taguchi, ANOVA and artificial neural network methods.
9 Steinko, W. (2004). Avaliação do projeto térmico do molde garante qualidade e redução de custos.
10 Park, H. S., & Dang, X. P. (2017). Development of a smart plastic injection mold with conformal cooling channels.
11 Xiao, C. L., Huang, H. X., & Yang, X. (2016). Development and application of rapid thermal cycling molding with electric heating for improving surface quality of microcellular injection molded parts.
12 Wang, W., Zhang, Y., Li, Y., Han, H., & Li, B. (2018). Numerical study on fully-developed turbulent flow and heat transfer in inward corrugated tubes with double-objective optimization.
13 Vieira, R. P., & Lona, L. M. F. (2016). Simulation of temperature effect on the structure control of polystyrene obtained by atom transfer radical polymerization.
14 Kantor, N. L. S. (2011). Análise da viabilidade técnica e econômica da automação de um armazém de grãos. In
15 Domingos, B. S., Moreira, C. R., Resende, E. W. B. S., Moreira, C. R., Resende, E. W., Rodrigues, D. M. S., & Dornelas, J. O. (2017). Estudo de payback simples para a substituição do gás liquefeito de petróleo pelo biogás em uma unidade hospitalar em Minas Gerais. In
16 Mendes, E. C., & Miranda, D. A. (2018). Análise de payback aplicado no processo de automatização de podas na produção de Buxus. In
17 Miranda, D. A., & Nogueira, A. L. (2019). Simulation of an injection process using a CAE tool: assessment of Operational conditions and mold design on the process efficiency.
18 Sacchelli, C. M., Miranda, D. A., Drechsler, M., & Nogueira, A. L. (2017). Simulação computacional da injeção de termoplásticos: comparação de ferramentas tipo CAE. In
19 Miranda, D. A., & Nogueira, A. L. (2017). Influência dos parâmetros de processo e da presença de saídas de gases na eficiência de moldes de injeção de peças em poliestireno cristal. In
20 Fernandes, C., Pontes, A. J., Viana, J. C., & Gaspar-Cunha, A. (2016). Modeling and optimization of the injection-molding process: a review.
21 Guerrier, P., Tosello, G., & Hattel, J. H. (2017). Flow visualization and simulation of the filling process during injection molding.
22 Hummel, P. V. R., & Taschner, M. R. B. (1995).
23 Miranda, D. A., & Cristofolini, R. (2016). Análise de retorno financeiro aplicado a dois robôs autonômos manipuladores que atuam na descarga de peças no processo de injeção de termoplásticos. In