Effect of disinfection techniques on physical-mechanical properties of a microwave-activated acrylic resin
Fortes, Carmen Beatriz Borges; Collares, Fabrício Mezzomo; Leitune, Vicente Castelo Branco; Schiroky, Priscila Raquel; Rodrigues, Stéfani Becker; Samuel, Susana Maria Werner; Petzhold, Cesar Liberato; Stefani, Valter
Abstract
Abstract: The effects of disinfection by microwave irradiation and immersion in peracetic acid on the physical-mechanical properties of a microwave-activated acrylic resin were evaluated. Specimens of acrylic resin were divided into a control group (specimens not disinfected) and 2 test groups subjected to one disinfection method: microwave irradiation at 850 W for 1 minute or immersion in 50 mL of 0.2% peracetic acid for 5 minutes. Specimens were submitted to Knoop hardness, flexural strength, flexural modulus, Izod impact, water sorption and solubility, glass transition temperature, and degree of conversion tests. Microwave disinfection significantly increased the mean Knoop hardness, Izod impact strength, water sorption, water solubility and glass transition temperature, whereas the flexural properties remained unaffected. Microwave disinfection increased the degree of conversion. Peracetic acid disinfection showed no changes in any properties. Both disinfection techniques did not adversely affect the evaluated properties.
Keywords
References
Radford, D. R., Challacombe, S. J., & Walter, J. D. (1999). Denture plaque and adherence of
Barbeau, J., Seguin, J., Goulet, J. P., Koninck, L., Avon, S. L., Lalonde, B., Rompre, P., & Deslauriers, N. (2003). Reassessing the presence of
Ramage, G., Tomsett, K., Wickes, B. L., Lopez-Ribot, J. L., & Redding, S. W. (2004). Denture stomatitis: a role for Candida biofilms.
Gendreau, L., & Loewy, Z. G. (2011). Epidemiology and etiology of denture stomatitis.
Kulak-Ozkan, Y., Kazazoglu, E., & Arikan, A. (2002). Oral hygiene habits, denture cleanliness, presence of yeasts and stomatitis in elderly people.
de Souza, R. F., de Freitas Oliveira Paranhos, H., Lovato da Silva, C. H., Abu-Naba’a, L., Fedorowicz, Z., & Gurgan, C. A. (2009). Interventions for cleaning dentures in adults.
Banting, D. W., & Hill, S. A. (2001). Microwave disinfection of dentures for the treatment of oral candidiasis.
Garcia-Cuesta, C., Sarrion-Perez, M. G., & Bagan, J. V. (2014). Current treatment of oral candidiasis: a literature review.
Schwindling, F. S., Rammelsberg, P., & Stober, T. (2014). Effect of chemical disinfection on the surface roughness of hard denture base materials: a systematic literature review.
Machado, A. L., Breeding, L. C., Vergani, C. E., & da Cruz Perez, L. E. (2009). Hardness and surface roughness of reline and denture base acrylic resins after repeated disinfection procedures.
Fernandes, F. H., Orsi, I. A., & Villabona, C. A. (2013). Effects of the peracetic acid and sodium hypochlorite on the colour stability and surface roughness of the denture base acrylic resins polymerised by microwave and water bath methods.
Guiraldo, R. D., Sczepanski, F., Sczepanski, C. R. B., Berger, S. B., Consani, R. L. X., & Gonini-Junior, A. (2014). Effect of sodium hypochlorite and peracetic acid on the surface roughness of acrylic resin polymerized by heated water for short and long cycles.
Seó, R. S., Vergani, C. E., Giampaolo, E. T., Pavarina, A. C., Reis, J. M. S. N., & Machado, A. L. (2008). Effect of disinfection by microwave irradiation on the strength of intact and relined denture bases and the water sorption and solubility of denture base and reline materials.
Azzarri, M. J., Cortizo, M. S., & Alessandrini, J. L. (2003). Effect of the curing conditions on the properties of an acrylic denture base resin microwave-polymerised.
Blagojevic, V., & Murphy, V. M. (1999). Microwave polymerization of denture base materials: a comparative study.
Urban, V. M., Machado, A. L., Oliveira, R. V., Vergani, C. E., Pavarina, A. C., & Cass, Q. B. (2007). Residual monomer of reline acrylic resins: effect of water-bath and microwave post-polymerization treatments.
Fortes, C. B. B., Leitune, V. C. B., Collares, F. M., Dornelles, N. B., Jr., Rodrigues, S. B., Samuel, S. W., Petzhold, C. L., & Stefani, V. (2015). Acrylic resin disinfection by peracetic acid and microwave energy.
Senna, P. M., Silva, W. J., & Del Bel Cury, A. A. (2012). Denture disinfection by microwave energy: influence of
Consant, R. L. X., Vieira, E. B., Mesquita, M. F., Mendes, W. B., & Arioli-Filho, J. N. (2008). Effect of microwave disinfection on physical and mechanical properties of acrylic resins.
Hamouda, I. M., & Ahmed, S. A. (2010). Effect of microwave disinfection on mechanical properties of denture base acrylic resin.
Lombardo, C. E., Canevarolo, S. V., Reis, J. M., Machado, A. L., Pavarina, A. C., Giampaolo, E. T., & Vergani, C. E. (2012). Effect of microwave irradiation and water storage on the viscoelastic properties of denture base and reline acrylic resins.
Ribeiro, D. G., Pavarina, A. C., Machado, A. L., Giampaolo, E. T., & Vergani, C. E. (2008). Flexural strength and hardness of reline and denture base acrylic resins after different exposure times of microwave disinfection.
Konchada, J., Karthigeyan, S., Ali, S. A., R, V., Amirisetty, R., & Dani, A. (2013). Effect of simulated microwave disinfection on the mechanical properties of three different types of denture base resins.
Senna, P. M., Da Silva, W. J., Faot, F., & Del Bel Cury, A. A. (2011). Microwave disinfection: cumulative effect of different power levels on physical properties of denture base resins.
Chassot, A. L., Poisl, M. I., & Samuel, S. M. (2006). In vivo and in vitro evaluation of the efficacy of a peracetic acid-based disinfectant for decontamination of acrylic resins.
Subha, N., Prabhakar, V., Koshy, M., Abinaya, K., Prabu, M., & Thangavelu, L. (2013). Efficacy of peracetic acid in rapid disinfection of Resilon and gutta-percha cones compared with sodium hypochlorite, chlorhexidine, and povidone-iodine.
International. Organization for Standardization – ISO. (1999).
American Society for Testing and Materials – ASTM. (2010).
Shen, C., Javid, N. S., & Colaizzi, F. A. (1989). The effect of glutaraldehyde base disinfectants on denture base resins.