Polímeros: Ciência e Tecnologia
https://app.periodikos.com.br/journal/polimeros/article/doi/10.1590/0104-1428.2288
Polímeros: Ciência e Tecnologia
Scientific & Technical Article

Nanocompósitos de polietileno/argila bentonítica com propriedades antichama

Polyethylene/bentonite clay nanocomposite with flame retardant properties

Oliveira, Sara Verusca de; Araújo, Edcleide Maria; Pereira, Celeste Margarida Correia; Leite, Amanda Melissa Damião

Downloads: 1
Views: 1084

Resumo

Nesta pesquisa, nanocompósitos de polietileno de alta densidade (PEAD) com argila montmorilonita (MMT) e argila organofílica (OMMT) foram preparados pelo método de intercalação por fusão, com o objetivo de examinar o efeito antichama do material obtido. Para fins de comparação, utilizou-se um produto comercial retardante de chama (RCP) na matriz de PEAD. O polietileno enxertado com anidrido maleico (PE-g-MA) foi utilizado como um compatibilizante dos sistemas. O PEAD e seus sistemas foram avaliados por difração de raios-X (DRX), inflamabilidade (UL94HB, índice de oxigênio (LOI) e calorimetria de cone). Os difratogramas de raios-X ilustraram que provavelmente ocorreu intercalação e/ou esfoliação parcial, com a formação de nanocompósito e/ou microcompósito. Os resultados obtidos para o índice de oxigênio mostraram que tanto o PEAD como seus sistemas apresentaram propriedades retardantes de chama. Por meio dos ensaios de inflamabilidade horizontal, verificou-se que a presença de 1% de argila MMT reduziu em 25% a inflamabilidade de PEAD e, por calorimetria de cone foi visto que a argila OMMT com percentagem de 3, 6 e 9% atuou reduzindo também a inflamabilidade dos nanocompósitos.

Palavras-chave

nanocompósitos, PEAD, antichama, argila organofílica, calorímetro de cone.

Abstract

In this research, nanocomposites of high density polyethylene (HDPE) with montmorillonite clay (MMT) and organoclay (OMMT) were prepared by melt intercalation, in order to examine the flame retardant effect of the obtained material. For comparison, a commercial flame retardant product (FRP) was used in the PE matrix. Grafted polyethylene with maleic anhydride (PE-g-MA) was used as a compatibilizer of the systems. HDPE and its systems were evaluated by: X-ray diffraction (XRD), and flammability (UL94HB, oxygen index (LOI) and Cone Calorimetry). The XRD patterns illustrated that probably partial intercalation and exfoliation occurred with the formation of nanocomposite and/or microcomposite. The results obtained for the oxygen index revealed that HDPE and its systems presented flame retardant properties. Through horizontal flammability tests, it was found that the presence of 1% MMT clay reduced 25% of the flammability of HDPE. By Cone Calorimetry was found that the OMMT clay with percentage of 3, 6 and 9% acted reducing the flammability of nanocomposites.

Keywords

nanocomposite, HDPE, flame retardant, organoclay, cone calorimetry.

References

1. Giannelis, E. P. (1996). Polymer layered nanocomposites. Advanced Materials, 8(1), 29-35. http://dx.doi.org/10.1002/adma.19960080104.

2. Zhu, J., Uhl, F. M., Morgan, A. B., & Wilkie, C. A. (2001). Studies on the mechanism by which the formation of nanocomposites enhances thermal stability. Chemistry of Materials, 13(12), 4649-4654. http://dx.doi.org/10.1021/cm010451y.

3. Linhares, A., Canalda, J. C., Cagiao, M. E., Gutierrez, M. C. G., Nogales, A., Gullón, I. M., Vera, J., & Ezquerra, T. A. (2007). Broad-band electrical conductivity of high density polyethylene nanocomposites with carbon nanoadditives: multiwall carbon nanotubes and carbon nanofibers. Macromolecules, 40(19), 8501-8517. http://dx.doi.org/10.1021/ma801410j.

4. Gopakumar, T. G., & Pagé, D. J. Y. S. (2004). Polyprolylene/graphite nanocomposites by thermo-kinetic mixing. Polymer Engineering and Science, 44(6), 1162-1169. http://dx.doi.org/10.1002/pen.20109.

5. Okada, A., Fukushima, Y., Kawasumi, M., Inagaki, S., Usuki, A., Sugiyama, S., Kurauchi, T., & Kamigaito, O. (1988). US Patent No 4.739.007.

6. Usuki, A., Kawasumi, M., Kojima, Y., Okada, A., Kurauchi, T., & Kamigaito, O. (1993). Swelling behavior of montmorillonite cation exchanged for ω-amino acids by ε- caprolactam. Journal of Materials Research, 8(5), 1174-1178. http://dx.doi.org/10.1557/JMR.1993.1174.

7. Wang, Y., Chen, F. B., Li, Y. C., & Wu, K. C. (2004). Melt processing of polypropylene/clay modified with maleated polypropylene compatibilizer. Composites. Part B, Engineering, 35(2), 111-124. http://dx.doi.org/10.1016/S1359-8368(03)00049-0.

8. Kojima, Y., Usuki, A., Kawasumi, M., Okada, A., Kurauchi, T., & Kamigaito, O. (1993). One-pot synthesis of nylon 6-clay hybrid. Journal Polymer Science, 31(7), 1755-1758. http://dx.doi.org/10.1002/pola.1993.080310714.

9. Varghese, S., Gatos, K. G., Apostolov, A. A., & Karger-Kocsis, J. (2004). Morphology and mechanical properties of layered silicate reinforced natural and polyurethane rubber blends produced by latex compounding. Journal of Applied Polymer Science, 92(1), 543-551. http://dx.doi.org/10.1002/app.20036.

10. Gilman, J. W., Jackson, C. L., Morgan, A. B., Harris, R. J., Manias, E., Giannelis, E. P., Wuthenow, M., Hilton, D., & Phillips, S. H. (2000). Flammability properties of polymer−layered-silicate nanocomposites. Polypropylene and polystyrene nanocomposites. Chemistry of Materials, 12(7), 1866-1873. http://dx.doi.org/10.1021/cm0001760.

11. Canaud, C., Visconte, L. L. Y., & Nunes, R. C. R. (2004). Propriedades mecânicas e de inflamabilidade de composições de borracha EPDM carregadas com negro de fumo e hidróxido de alumínio. Polímeros: Ciência e Tecnologia, 11(1), 35-40. http://dx.doi.org/10.1590/S0104-14282001000100009.

12. Moldoveanu, S. C. (2005). Analytical pyrolysis of synthetic organic polymers. Amsterdam: Elsevier.

13. Pierella, L. B., Renzini, S., & Anunziata, O. A. (2005). Catalytic degradation of high density polyethylene over microporous and mesoporous materials. Microporous and Mesoporous Materials, 81(1-3), 155-159. http://dx.doi.org/10.1016/j.micromeso.2004.11.015.

14. Kahlow, S. (2007). Pirólise de polipropileno pós-consumo visando a obtenção de novos produtos (Dissertação de mestrado). Universidade Tecnológica Federal do Paraná, Curitiba.

15. European Brominated Flame Retardant Industry Panel – EBFRIP. (2000). Bromine Science and Environmental Forum – BSEF. Brussels, Belgium: EBFRIP. Recuperado em 10 de julho de 2010, de http://www.ebfrip.org

16. Barbosa, R. (2009) Estudo da modificação de argilas bentoníticas para aplicação em nanocompósito de polietileno (Tese de doutorado). Universidade Federal de Campina Grande, Campina Grande.

17. Ray, S. S., & Okamoto, M. (2003). Polymer/layered silicate nanocomposites: a review from preparation to processing. Progress in Polymer Science, 28(11), 1539-1641. http://dx.doi.org/10.1016/j.progpolymsci.2003.08.002.

18. Cho, J. W., & Paul, D. R. (2001). Nylon 6 nanocomposites by melt compounding. Polymer, 42(3), 1083-1094. http://dx.doi.org/10.1016/S0032-3861(00)00380-3.

19. Kissin, Y. V., & Fruitwala, H. A. (2007). Analysis of polyolefins and olefin copolymers using Crystal technique: resolution of Crystal curves. Journal of Applied Polymer Science, 106(6), 3872-3883. http://dx.doi.org/10.1002/app.27090.

20. Zhao, Z., Tang, T., Qin, Y., & Huang, B. (2003). Effects of surfactant loadings on the dispersion of clays in maleated polypropylene. Langmuir, 19(18), 7157-7159. http://dx.doi.org/10.1021/la034575w.

21. Zanetti, M., & Costa, L. (2004). Preparation and combustion behaviour of polymer/layered silicate nanocomposites based upon PE and EVA. Polymer, 45(13), 4367-4373. http://dx.doi.org/10.1016/j.polymer.2004.04.043.

22. Peneva, Y., Tashev, E., & Minkova, L. (2006). Flammability, micro hardness and transparency of nanocomposites based on functionalized polyethylenes. European Polymer Journal, 42(10), 2228-2235. http://dx.doi.org/10.1016/j.eurpolymj.2006.06.027.

23. Lenza, J., Merkel, K., & Rydarowski, H. (2012). Comparison of the effect of montmorillonite, magnesium hydroxide and a mixture of both on the flammability properties and mechanism of charformation of HDPE composites. Polymer Degradation & Stability, 97(12), 2581-2593. http://dx.doi.org/10.1016/j.polymdegradstab.2012.07.010.

24. Song, R., Wang, Z., Meng, B., Zhang, T., & Tang, T. (2007). Influences of catalysis and dispersion of organically modified montmorillonite on flame retardancy of polypropylene nanocomposites. Journal of Applied Polymer Science, 106(5), 3488-3494. http://dx.doi.org/10.1002/app.27033.

25. Alves, T. S., Barbosa, R., Carvalho, L. H., & Canedo, E. L. (2014). Inflamabilidade de nanocompósitos de polipropileno/argila organofílica. Polímeros: Ciência e Tecnologia, 24(3), 307-313. http://dx.doi.org/10.4322/polimeros.2014.030.

5b7acc290e88252d73896e51 polimeros Articles
Links & Downloads

Polímeros: Ciência e Tecnologia

Share this page
Page Sections