The type of titanium and processing have?
Titanium and the type of processing:
1, water jet cutting
Another kind of titanium and cutting method is water jet cutting. Water jet cutting with high pressure water jet (also can be blended with abrasive) in the material form the incision. In cutting the low non standard fasteners melting point materials such as plastic and aluminum, it is a superior to the manufacture of laser cutting Method to prevent unnecessary deformation.
2, plasma cutting
The third is the most powerful titanium is plasma cutting and cutting method. Plasma cutting by producing extremely hot ionized gas (plasma) electrical channel to work, the channel melt material to form a cutting. It is cutting more than 10 mm thick material The effective method, but different cutting accuracy with laser or water jet cutting.
3, laser cutting
Cut metal plate of one of the key method is to use Steel investment casting a laser cutting machine. Laser cutting using high-energy beams through a lens or mirror enhanced combustion/evaporation materials to form a cutting. This is a very quick and precise titanium cutting method, and because the heat Less affected zone, and hence the possibility of warping is reduced. The most commonly used CO2 and fiber laser, can cut up to 10 mm thick material.
4, the guillotine
Titanium and titanium scaffold is a plus of the effective methods to create a clean, accurate cutting. Sheet feed between the two blades, then the strong compression together to make the sheet deformation, until the final cut. The scaffold is a quick and cheap Produce high quality cutting method, although it will make the metal edge slightly out of shape.
5, stamping
Titanium stamping use similar to the guillotine cutting Stainless steel foundry mechanism, however, it USES the forming of metal (called a mold) cutting tools. The metal plate mold force at high speed to for perforated metal plate. Usually use the standard shapes (round, square, rectangular Mould shape), however, can create custom tools for stamping more complex shapes. Due to the cost of the manufacture of moulds, this method is more suitable for mass production.
6, bending
Bending is titanium and shape for the feature of basic manufacturing process. Using metal plate is called bending machine bending machine, the machine by the tools (punch), and the tool - die (V). Material is placed between the tool, the socket screw plug punch press into the v-shaped mold In order to form bending. To press into the v-shaped bending Angle by the punch mould the depth of the decision.